# Integra Help

**URL:** https://forum.g2ic.com/c/information/integra-help/23.md

[Latest](https://forum.g2ic.com/latest.md) · [Categories](https://forum.g2ic.com/categories.md) · [Tags](https://forum.g2ic.com/tags.md)

---

## [About the Integra Help category](https://forum.g2ic.com/t/about-the-integra-help-category/17959)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 0

</div>

Archived “Integra Help” threads pre-2008.

---

## [Vehicle Speed Sensor (VSS), HELP!](https://forum.g2ic.com/t/vehicle-speed-sensor-vss-help/18271)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 4\
**Last updated:** [October 26, 2021, 7:49am UTC](https://forum.g2ic.com/t/vehicle-speed-sensor-vss-help/18271 "2021-10-26T07:49:59Z")

</div>

Has anyone ever changed the VSS on their car?? There are apparently 2 parts, one behind the gauge cluster and one on the tranny. It’s the one on the tranny that I am refering to. There is nothing in my repair guide ab…

---

## [Cold Air vs. Short Ram](https://forum.g2ic.com/t/cold-air-vs-short-ram/18428)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 31\
**Last updated:** [June 28, 2003, 1:16am UTC](https://forum.g2ic.com/t/cold-air-vs-short-ram/18428 "2003-06-28T01:16:07Z")

</div>

I know this question has been debated for a long time but i still wanna know, for a B17A1, which is better? Please give advantages and disadvantages of each.

---

## [Installing exedy clutch](https://forum.g2ic.com/t/installing-exedy-clutch/26186)

<div class="topic-metadata">

**Author:** [@superthug](https://forum.g2ic.com/u/superthug)\
**Replies:** 7\
**Last updated:** [October 17, 2002, 1:33pm UTC](https://forum.g2ic.com/t/installing-exedy-clutch/26186 "2002-10-17T13:33:36Z")

</div>

I got the clutch put in but when we put everything back together. I couldn’t shift easily it was hard to do it. So my friend adjusted the cable that goes to the tranny. Then at one point I couldn’t shift at all. Then all…

---

## [odd electronic problem...](https://forum.g2ic.com/t/odd-electronic-problem/20445)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 6\
**Last updated:** [October 16, 2002, 6:53am UTC](https://forum.g2ic.com/t/odd-electronic-problem/20445 "2002-10-16T06:53:46Z")

</div>

hey everyone, its been awhile since i have posted! my radio and heater both started acting up tongiht. the cd player has been turning on/off and along with that, so has the climate control fan. I assume these two things…

---

## [Installing s2000 antenna](https://forum.g2ic.com/t/installing-s2000-antenna/23230)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 14\
**Last updated:** [October 16, 2002, 4:32am UTC](https://forum.g2ic.com/t/installing-s2000-antenna/23230 "2002-10-16T04:32:04Z")

</div>

i’m interested in the s2000 antenna for my car, and i was looking on ebay at some of the auctions, and i’ve found one that is pretty cheap, but only includes the antenna itself. can i screw this antenna into my current …

---

## [Fiberglass](https://forum.g2ic.com/t/fiberglass/25949)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 4\
**Last updated:** [October 15, 2002, 6:27pm UTC](https://forum.g2ic.com/t/fiberglass/25949 "2002-10-15T18:27:48Z")

</div>

Anyone know how to fibeglass a dash board? What all I need?

---

## [HELP!!! painting moldings and fixing rust](https://forum.g2ic.com/t/help-painting-moldings-and-fixing-rust/25289)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 3\
**Last updated:** [October 14, 2002, 9:34pm UTC](https://forum.g2ic.com/t/help-painting-moldings-and-fixing-rust/25289 "2002-10-14T21:34:48Z")

</div>

im getting ready to paint my mouldings, lip and mirrors. how do the side moldings come off??? because i really dont want to have to mask very much. i have the usual rust right behind the rear wheels where the quarter p…

---

## [Axles, axles.](https://forum.g2ic.com/t/axles-axles/21547)

<div class="topic-metadata">

**Author:** [@lowkey](https://forum.g2ic.com/u/lowkey)\
**Replies:** 21\
**Last updated:** [October 14, 2002, 8:13pm UTC](https://forum.g2ic.com/t/axles-axles/21547 "2002-10-14T20:13:21Z")

</div>

Are all B-series axles intechangeable? If they are, any stonger than the others? I ask this because I am sick of allways having to replace em. Even though they are life-time warranty. I just wanna know so if any ARE st…

---

## [rear 4 door handles on 2 door](https://forum.g2ic.com/t/rear-4-door-handles-on-2-door/21858)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 2\
**Last updated:** [October 13, 2002, 7:45pm UTC](https://forum.g2ic.com/t/rear-4-door-handles-on-2-door/21858 "2002-10-13T19:45:04Z")

</div>

ne one who’s done this swap. help me out is this pretty hard to do cuz i’m gettin power locks on my '90 gs and plan to shave all keyholes. so ne help would be appreciated. thanks.

---

## [ABS and strut bars...](https://forum.g2ic.com/t/abs-and-strut-bars/25945)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 13\
**Last updated:** [October 13, 2002, 1:48am UTC](https://forum.g2ic.com/t/abs-and-strut-bars/25945 "2002-10-13T01:48:06Z")

</div>

i can’t remember if i asked this once already, but does anyone know if a front strut bar is made that can clear the ABS?

---

## [intake resonator affects m.p.g?](https://forum.g2ic.com/t/intake-resonator-affects-m-p-g/27241)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 3\
**Last updated:** [October 12, 2002, 5:52am UTC](https://forum.g2ic.com/t/intake-resonator-affects-m-p-g/27241 "2002-10-12T05:52:27Z")

</div>

hey guys, I was just wondering if removing the intake resonator would effect your fuel milegage in anyway. Would you get better mileage or worse? If any change… about how much? Oh and i was just wondering how much miles …

---

## [A/f Ratio Guage!!!! Someone Help Me Asap!!!](https://forum.g2ic.com/t/a-f-ratio-guage-someone-help-me-asap/23036)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 22\
**Last updated:** [October 10, 2002, 4:04pm UTC](https://forum.g2ic.com/t/a-f-ratio-guage-someone-help-me-asap/23036 "2002-10-10T16:04:59Z")

</div>

Where does the Green Wire splice into the ECU? I think I spliced the wrong wire cause the guage works, but when i am not giving it throttle, it stays in stoich, when I give it gas it automatically goes directly to rich …

---

## [Power steering removal... where to loop](https://forum.g2ic.com/t/power-steering-removal-where-to-loop/25954)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 18\
**Last updated:** [October 10, 2002, 4:46am UTC](https://forum.g2ic.com/t/power-steering-removal-where-to-loop/25954 "2002-10-10T04:46:48Z")

</div>

I want to remove my power steering pump ASAP, but want to be sure of where to loop the system to minimize excessive hosing. I’m wondering for those who removed it completely, did you just loop the hoses going to the pump…

---

## ['90 LS - Power door lock, broken lock/unlock levers](https://forum.g2ic.com/t/90-ls-power-door-lock-broken-lock-unlock-levers/26489)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 3\
**Last updated:** [October 9, 2002, 3:45am UTC](https://forum.g2ic.com/t/90-ls-power-door-lock-broken-lock-unlock-levers/26489 "2002-10-09T03:45:35Z")

</div>

Hi, Bought a 1990 Integra, the only “mechanical” problem is that the lock/unlock levers are snapped on both doors. The car came with alarm & remore door locks. When I arm/disarm or start/shut off the engine, the doors…

---

## [Weird rattle at 4000+ RPM](https://forum.g2ic.com/t/weird-rattle-at-4000-rpm/26336)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 4\
**Last updated:** [October 8, 2002, 4:00pm UTC](https://forum.g2ic.com/t/weird-rattle-at-4000-rpm/26336 "2002-10-08T16:00:12Z")

</div>

When my 93 teg RS goes above 4000+ RPM it makes a rattling noise, I can feel the rattle in the shifter. It doesn’t make the noise till I start deaccelerating, it’s fine as long as I keep the gas floored. Any help is apre…

---

## [jdm mirror help/relay](https://forum.g2ic.com/t/jdm-mirror-help-relay/26929)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 9\
**Last updated:** [October 8, 2002, 6:48am UTC](https://forum.g2ic.com/t/jdm-mirror-help-relay/26929 "2002-10-08T06:48:07Z")

</div>

hey, i just put in the jdm side mirrors on my car, i got them wired to each of the mirrors, the only problem is how to hook up the relay, i used the diagram from the teg tips, the only problem is that i don’t know where…

---

## [Steering Wheel ?](https://forum.g2ic.com/t/steering-wheel/25473)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 6\
**Last updated:** [October 8, 2002, 5:30am UTC](https://forum.g2ic.com/t/steering-wheel/25473 "2002-10-08T05:30:33Z")

</div>

The wheel on my teg is fading really bad all the way around. I want to get another one, i was wondering if the steering wheels off other trims will fit my rs??

---

## [need help with ignition set-up!!!](https://forum.g2ic.com/t/need-help-with-ignition-set-up/26500)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 9\
**Last updated:** [October 6, 2002, 5:38pm UTC](https://forum.g2ic.com/t/need-help-with-ignition-set-up/26500 "2002-10-06T17:38:35Z")

</div>

sup guys, i’ve just got a MSD Sport Compact Ignition, MSD Blaster SS Coil, MSD Distributor Cap, and MSD Wires for my car… but i need your help on how to set everything up. my friends and i are havin’ some trouble findin…

---

## [ebay short shifters](https://forum.g2ic.com/t/ebay-short-shifters/25799)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 28\
**Last updated:** [October 6, 2002, 3:54pm UTC](https://forum.g2ic.com/t/ebay-short-shifters/25799 "2002-10-06T15:54:32Z")

</div>

has anyone bought and used one of these $20 ebay short shifter? the price is good but does the saying you get what you pay for apply here? i know buying no name cereal is a good deal but a bad shifter could do a number…

---

## [msd blaster coil](https://forum.g2ic.com/t/msd-blaster-coil/24840)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 5\
**Last updated:** [October 6, 2002, 3:02pm UTC](https://forum.g2ic.com/t/msd-blaster-coil/24840 "2002-10-06T15:02:40Z")

</div>

i have the msd dist cap and blaster coil. i was wondering, if you connect the blaster coil, does your car still use your stock coil? cause my stock coil is bad.

---

## [stressed shocks??](https://forum.g2ic.com/t/stressed-shocks/24403)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 6\
**Last updated:** [October 4, 2002, 8:04am UTC](https://forum.g2ic.com/t/stressed-shocks/24403 "2002-10-04T08:04:41Z")

</div>

im not talking about the fender gap. im talking about the shocks, i lowered my car with skunk2 coilover and put kooni yellows with it… and i think i only have an inch for my shocks to play and hit the bump stop… is this…

---

## [sick engine](https://forum.g2ic.com/t/sick-engine/27183)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 10\
**Last updated:** [October 1, 2002, 12:17am UTC](https://forum.g2ic.com/t/sick-engine/27183 "2002-10-01T00:17:06Z")

</div>

My teg isnt running well, it backfires when i give it gas, idles rough, and is very slow to rev, generally lacking power… while it’s idling, i can pull the 2 plugwires for the center 2 cylinders and the idle dosent chan…

---

## [Car shakes like a mofo](https://forum.g2ic.com/t/car-shakes-like-a-mofo/27422)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 9\
**Last updated:** [September 30, 2002, 7:36am UTC](https://forum.g2ic.com/t/car-shakes-like-a-mofo/27422 "2002-09-30T07:36:20Z")

</div>

ok my car is LOUD and it shakes like a mofo… I have a CAI and exhaust and my engine is LOUD as hell. I don’t here any knocking but I don’t think it seem right can anyone help me out.

---

## [Cold Air or Short Ram?](https://forum.g2ic.com/t/cold-air-or-short-ram/27389)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 13\
**Last updated:** [September 30, 2002, 1:35am UTC](https://forum.g2ic.com/t/cold-air-or-short-ram/27389 "2002-09-30T01:35:05Z")

</div>

How much of a difference is there between a AEM short ram intake vs. an AEM cold air intake ? performance wise Thanks

---

## [Need One-Piece install guide....](https://forum.g2ic.com/t/need-one-piece-install-guide/20600)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 19\
**Last updated:** [September 29, 2002, 8:37am UTC](https://forum.g2ic.com/t/need-one-piece-install-guide/20600 "2002-09-29T08:37:15Z")

</div>

I have searched these forums and got some good tips but not a complete guide, and Teg Tips does not have an one-piece headlight install guide. If there is one on the net, just steer me towards its direction if you would …

---

## [3rd gear grind?](https://forum.g2ic.com/t/3rd-gear-grind/27473)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 2\
**Last updated:** [September 29, 2002, 7:28am UTC](https://forum.g2ic.com/t/3rd-gear-grind/27473 "2002-09-29T07:28:11Z")

</div>

I notice when I hit the top of my shift knob while in my car I can hear the clutch cable I believe make a sound. It’s like hitting the car or something. Could this be the cause of my grinding problem in 3rd or are my syn…

---

## [So what exactly do out-of-adjustment valves sound like?](https://forum.g2ic.com/t/so-what-exactly-do-out-of-adjustment-valves-sound-like/18506)

<div class="topic-metadata">

**Author:** [@system](https://forum.g2ic.com/u/system)\
**Replies:** 14\
**Last updated:** [September 28, 2002, 9:45am UTC](https://forum.g2ic.com/t/so-what-exactly-do-out-of-adjustment-valves-sound-like/18506 "2002-09-28T09:45:58Z")

</div>

I’m pretty sure my valves need to be readjusted. Never had to deal with it on a B-series before, just my mom’s crappy Chrysler minivan. The teg kind of sounds like this I dunno, sand-paper-ish noise. Or maybe like bru…

---

## [how come my coolant foams??](https://forum.g2ic.com/t/how-come-my-coolant-foams/26627)

<div class="topic-metadata">

**Author:** [@gTIntegra](https://forum.g2ic.com/u/gTIntegra)\
**Replies:** 8\
**Last updated:** [September 27, 2002, 3:47am UTC](https://forum.g2ic.com/t/how-come-my-coolant-foams/26627 "2002-09-27T03:47:59Z")

</div>

i dont know why!! did this happen to anybody? my car also overheats! please help!

---

## [94-01 OBX Cat: Will it fit my g2 ('91)](https://forum.g2ic.com/t/94-01-obx-cat-will-it-fit-my-g2-91/27363)

<div class="topic-metadata">

**Author:** [@jDMJeRk](https://forum.g2ic.com/u/jDMJeRk)\
**Replies:** 3\
**Last updated:** [September 27, 2002, 1:13am UTC](https://forum.g2ic.com/t/94-01-obx-cat-will-it-fit-my-g2-91/27363 "2002-09-27T01:13:54Z")

</div>

…would a 94+ cat fit on my g2? check this http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1854062159 Please help me!! Thanks Nick

[Next page](https://forum.g2ic.com/c/information/integra-help/23.md?page=1)
