# 15x8 +35 wheels **URL:** \ **Category:** Suspension, Brakes & Wheels\ **Created:** [February 7, 2024, 5:10pm UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504 "2024-02-07T17:10:38Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![da9.joseph](https://forum.g2ic.com/user_avatar/forum.g2ic.com/da9.joseph/32/11630_2.png) [@da9.joseph](https://forum.g2ic.com/u/da9.joseph)\ **Post date:** [February 7, 2024, 5:10pm UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504/1 "2024-02-07T17:10:38Z")
looking to get 15x8 +35 TE37 soon and wondering if they will clear the stock brakes and if i will have to roll the rears. thanks in advance ---
**Author:** ![NFULFX](https://forum.g2ic.com/user_avatar/forum.g2ic.com/nfulfx/32/5_2.png) [@NFULFX](https://forum.g2ic.com/u/NFULFX)\ **Post date:** [February 7, 2024, 7:23pm UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504/2 "2024-02-07T19:23:40Z")
Those wheels are popular but you can get a decent idea using the sites below. Compare using the: 1993 Integra 6 spoke wheel 14x5.5 +40 offset 1995 Integra Fat Fives 15x6 +45 offset If you have either of those. Or use the specs for your current wheels. 15" will clear the stock brakes. > **[Wheel Offset and backspacing calculator](https://www.1010tires.com/Tools/Wheel-Offset-Calculator#)** > > Wheel Offset Calculator | 1010Tires.com is the largest and most trusted online and retail tire company. > **[Rim & Tire Size Calculator. Custom Offsets](https://www.wheel-size.com/calc/)** > > Tire Tech Information - The Wheel Fitment, Tyre Stretch, Rolling Radius and Speedometer Error Calculator. Play with specs, try different settings, compare results > **[Tire Size Calculator](https://tiresize.com/calculator/)** > > The best tire size calculator. Use our tire size calculator to find tire size specs and suggested tire sizes. Then check prices for all available tire sizes. ---
**Author:** ![db1Lee](https://forum.g2ic.com/user_avatar/forum.g2ic.com/db1lee/32/14164_2.png) [@db1Lee](https://forum.g2ic.com/u/db1Lee)\ **Post date:** [February 19, 2024, 3:41am UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504/3 "2024-02-19T03:41:04Z")
I just fit a set of 57DR’s in the same spec. I went with 205/50R15 Nitto Neo Gen’s. No fender rolling, spacers or modifications needed (Other than adjusting the rear camber). I dont have many good pics of it yet, but the couple i do have I have love it. ![20240218_193046](https://forum.g2ic.com/uploads/default/original/2X/2/2095dab6c6fe44d8a832274cf925eab46518aafa.jpeg) ![20240218_193001](https://forum.g2ic.com/uploads/default/original/2X/6/6d0f4d5d9e79832906c8a6598b4e1e458ebf55f2.jpeg) ---
**Author:** ![NFULFX](https://forum.g2ic.com/user_avatar/forum.g2ic.com/nfulfx/32/5_2.png) [@NFULFX](https://forum.g2ic.com/u/NFULFX)\ **Post date:** [February 19, 2024, 12:40pm UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504/4 "2024-02-19T12:40:48Z")
Thanks for the pix. Do those tires actually help protect the wheel rim? 205 tire with a 8-inch wheel – they’re pretty much identical widths. ---
**Author:** ![butt.dyno](https://forum.g2ic.com/user_avatar/forum.g2ic.com/butt.dyno/32/11277_2.png) [@butt.dyno](https://forum.g2ic.com/u/butt.dyno)\ **Post date:** [February 20, 2024, 12:19am UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504/5 "2024-02-20T00:19:51Z")
![Kuni_1630810176083](https://forum.g2ic.com/uploads/default/original/2X/8/86f66218460724018c34041f1ef954de793695e9.jpeg) These were 15x8 +28, with a 205 tire they didn’t need rolling and did not rub on full lock but I wasn’t too low. As for brake clearance you wont have to worry about clearing stock brakes. It isn’t until 45 or greater offset you will have to start worrying about clearing big brakes like ITR swap or Spoon etc let alone stock ones. Hell there was an old port on honda tech showing GSR blades clearing spoons, I want to try that out!! ---
**Author:** ![db1Lee](https://forum.g2ic.com/user_avatar/forum.g2ic.com/db1lee/32/14164_2.png) [@db1Lee](https://forum.g2ic.com/u/db1Lee)\ **Post date:** [February 20, 2024, 6:59am UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504/6 "2024-02-20T06:59:03Z")
Thank you very much! I’m not too sure what you mean by protection though? ---
**Author:** ![NFULFX](https://forum.g2ic.com/user_avatar/forum.g2ic.com/nfulfx/32/5_2.png) [@NFULFX](https://forum.g2ic.com/u/NFULFX)\ **Post date:** [February 20, 2024, 12:24pm UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504/7 "2024-02-20T12:24:20Z")
Some tires have an extra little bulge that help protect against curb rash. ---
**Author:** ![db1Lee](https://forum.g2ic.com/user_avatar/forum.g2ic.com/db1lee/32/14164_2.png) [@db1Lee](https://forum.g2ic.com/u/db1Lee)\ **Post date:** [February 20, 2024, 3:24pm UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504/8 "2024-02-20T15:24:31Z")
Oh i thought that’s what you meant. I mean hopefully it protects it, but at the same time I really hope i never need to find that out either lol ---
**Author:** ![butt.dyno](https://forum.g2ic.com/user_avatar/forum.g2ic.com/butt.dyno/32/11277_2.png) [@butt.dyno](https://forum.g2ic.com/u/butt.dyno)\ **Post date:** [February 20, 2024, 3:32pm UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504/9 "2024-02-20T15:32:54Z")
I managed to curb my 8 wide wheels with 205 tires, they still stretch a tiny bit unfortunately. ---
**Author:** ![NFULFX](https://forum.g2ic.com/user_avatar/forum.g2ic.com/nfulfx/32/5_2.png) [@NFULFX](https://forum.g2ic.com/u/NFULFX)\ **Post date:** [February 21, 2024, 3:32pm UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504/10 "2024-02-21T15:32:34Z")
I’ve seen “wheel protectors” and “wheel guards” available. They are colored. But I don’t know how good they are for protection / staying on the wheel. ---
**Author:** ![KatsumotoWorks](https://forum.g2ic.com/user_avatar/forum.g2ic.com/katsumotoworks/32/14037_2.png) [@KatsumotoWorks](https://forum.g2ic.com/u/KatsumotoWorks)\ **Post date:** [March 13, 2024, 8:48am UTC](https://forum.g2ic.com/t/15x8-35-wheels/103504/11 "2024-03-13T08:48:11Z")
I have 15x7.5 +35 countergrams and the inside of the barrel is about half an inch from contacting the top of the rear knuckle. You might have to go lower offset if you want to fit 8 inch wide