# 92-93 cat-back fit 90-91 ?

**URL:** <https://forum.g2ic.com/t/92-93-cat-back-fit-90-91/73949>\
**Category:** Hybrids & Advanced Aftermarket Engine Performance\
**Created:** [October 24, 2006, 2:05am UTC](https://forum.g2ic.com/t/92-93-cat-back-fit-90-91/73949 "2006-10-24T02:05:49Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mattv](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/m/b19c9b/32.png) [@Mattv](https://forum.g2ic.com/u/Mattv)\
**Post date:** [October 24, 2006, 2:05am UTC](https://forum.g2ic.com/t/92-93-cat-back-fit-90-91/73949/1 "2006-10-24T02:05:49Z")

</div>

just curious, im buying a new exhaust system and I like the skunk2 system but they make it for 92-93 ls gs rs gsr, curious if it has major fitment issues between 90-91 and 92-93 cat-back systems. not in specific to the skunk2 system but for any exhaust.

---

<div class="post-metadata">

**Author:** ![Snake5192](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/s/e47774/32.png) [@Snake5192](https://forum.g2ic.com/u/Snake5192)\
**Post date:** [October 24, 2006, 2:30am UTC](https://forum.g2ic.com/t/92-93-cat-back-fit-90-91/73949/2 "2006-10-24T02:30:24Z")

</div>

It won’t directly fit on to a 90 or 91 teg, because of different header and cat lengths. For it to fit a 91, the front pipe with the resonator would have to be shortened if im not mistaken, because in some exhaust systems like Tanabe, they include a little two inch piece of piping which u have to bolt on to the front pipe…I dont know if Skunk2 does or not, if not, ull have to get like that much cut off.

---

<div class="post-metadata">

**Author:** ![Mattv](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/m/b19c9b/32.png) [@Mattv](https://forum.g2ic.com/u/Mattv)\
**Post date:** [October 24, 2006, 3:36am UTC](https://forum.g2ic.com/t/92-93-cat-back-fit-90-91/73949/3 "2006-10-24T03:36:29Z")

</div>

ah ok, im going to end up getting tanabe concept G, itll save the hassle 😛

---

<div class="post-metadata">

**Author:** ![Snake5192](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/s/e47774/32.png) [@Snake5192](https://forum.g2ic.com/u/Snake5192)\
**Post date:** [October 24, 2006, 4:43pm UTC](https://forum.g2ic.com/t/92-93-cat-back-fit-90-91/73949/4 "2006-10-24T16:43:43Z")

</div>

Haha good choice. With Tanabe, they have two different part numbers for that exhaust, one for the 90-91 w/o the adaptor and another for the 92-93 which includes the adaptor, so they save u the hassle of having to get that crap done.