# 92 db ls vtec turbo high hp build **URL:** \ **Category:** Forced Induction\ **Created:** [April 22, 2015, 1:51pm UTC](https://forum.g2ic.com/t/92-db-ls-vtec-turbo-high-hp-build/101222 "2015-04-22T13:51:14Z")\ **Posts on this page:** 9\ **Page:** 3
**Author:** ![turboac](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/dfb087/32.png) [@turboac](https://forum.g2ic.com/u/turboac)\ **Post date:** [February 10, 2016, 12:20am UTC](https://forum.g2ic.com/t/92-db-ls-vtec-turbo-high-hp-build/101222/41 "2016-02-10T00:20:29Z")
[![](http://s19.postimg.org/vd03ymq5r/542_05_1110.jpg)](http://postimg.org/image/vd03ymq5r/) Just got these in the mail today. I’ll post a pic when those are installed. Skunk2 is you’re wondering. Update on the wire tuck: I had a minor surgery on Thursday so I haven’t made anymore progress, but will hopefully have some more pics soon. ---
**Author:** ![turboac](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/dfb087/32.png) [@turboac](https://forum.g2ic.com/u/turboac)\ **Post date:** [February 12, 2016, 8:31pm UTC](https://forum.g2ic.com/t/92-db-ls-vtec-turbo-high-hp-build/101222/42 "2016-02-12T20:31:14Z")
Made some progress yesterday with the wire tuck. Finally got the dash removed: [[img=http://s9.postimg.org/ykkfar7a3/image.jpg]](http://postimg.org/image/ykkfar7a3/) Removed the ac and fan boxes: [[img=http://s17.postimg.org/3s8h6v463/image.jpg]](http://postimg.org/image/3s8h6v463/) Got the harness pulled through and the loom off: [[img=http://s10.postimg.org/lxt8kdwol/image.jpg]](http://postimg.org/image/lxt8kdwol/) I was hoping to finish the passenger side but it got too cold. Hopefully I can finish it up by the end of the weekend and get the drivers side started on. ---
**Author:** ![turboac](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/dfb087/32.png) [@turboac](https://forum.g2ic.com/u/turboac)\ **Post date:** [February 16, 2016, 4:07am UTC](https://forum.g2ic.com/t/92-db-ls-vtec-turbo-high-hp-build/101222/43 "2016-02-16T04:07:40Z")
Got all the wires through and placed. I still have to cut all of the abs wires and extend some, but ran out of time tonight. Here’s some pics: [![](http://s10.postimg.org/j56ewfn39/image.jpg)](http://postimg.org/image/j56ewfn39/) [![](http://s23.postimg.org/jqt1fq0nr/image.jpg)](http://postimg.org/image/jqt1fq0nr/) ---
**Author:** ![turboac](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/dfb087/32.png) [@turboac](https://forum.g2ic.com/u/turboac)\ **Post date:** [February 28, 2016, 3:40pm UTC](https://forum.g2ic.com/t/92-db-ls-vtec-turbo-high-hp-build/101222/44 "2016-02-28T15:40:40Z")
[![](http://s20.postimg.org/z2fkenbeh/image.jpg)](http://postimg.org/image/z2fkenbeh/) [![](http://s20.postimg.org/wmicejipl/image.jpg)](http://postimg.org/image/wmicejipl/) [![](http://s20.postimg.org/87a4dhjsp/image.jpg)](http://postimg.org/image/87a4dhjsp/) I’ve gotta get some wire numbers before I can run these through. I was going to pull them through the firewall but it looked like a huge pain in the ass so I’m short cutting it a little bit. I’m really not that worried about it though: [![](http://s29.postimg.org/6xtmrjfyb/image.jpg)](http://postimg.org/image/6xtmrjfyb/) ---
**Author:** ![turboac](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/dfb087/32.png) [@turboac](https://forum.g2ic.com/u/turboac)\ **Post date:** [March 3, 2016, 10:40pm UTC](https://forum.g2ic.com/t/92-db-ls-vtec-turbo-high-hp-build/101222/45 "2016-03-03T22:40:51Z")
Done! Don’t mind the dirt. I’m gonna clean it when the motor gets pulled. I still have to put the dash back in but should be easier then it was coming out. [![](http://s20.postimg.org/8rmfvgvw9/image.jpg)](http://postimg.org/image/8rmfvgvw9/) [![](http://s20.postimg.org/rl88sgu49/image.jpg)](http://postimg.org/image/rl88sgu49/) ---
**Author:** ![turboac](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/dfb087/32.png) [@turboac](https://forum.g2ic.com/u/turboac)\ **Post date:** [March 4, 2016, 10:41pm UTC](https://forum.g2ic.com/t/92-db-ls-vtec-turbo-high-hp-build/101222/46 "2016-03-04T22:41:07Z")
Got my id2000’s today [![](http://s20.postimg.org/4ltm9ylix/image.jpg)](http://postimg.org/image/4ltm9ylix/) ---
**Author:** ![Mnda90](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/m/df788c/32.png) [@Mnda90](https://forum.g2ic.com/u/Mnda90)\ **Post date:** [March 6, 2016, 4:01am UTC](https://forum.g2ic.com/t/92-db-ls-vtec-turbo-high-hp-build/101222/47 "2016-03-06T04:01:20Z")
Hell yes man ---
**Author:** ![turboac](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/dfb087/32.png) [@turboac](https://forum.g2ic.com/u/turboac)\ **Post date:** [March 25, 2016, 7:13pm UTC](https://forum.g2ic.com/t/92-db-ls-vtec-turbo-high-hp-build/101222/48 "2016-03-25T19:13:13Z")
Teaser pic of the block. Should have more progress soon: [![](http://s9.postimg.org/jnfokez2j/image.jpg)](http://postimg.org/image/jnfokez2j/) ---
**Author:** ![turboac](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/dfb087/32.png) [@turboac](https://forum.g2ic.com/u/turboac)\ **Post date:** [June 30, 2016, 1:51pm UTC](https://forum.g2ic.com/t/92-db-ls-vtec-turbo-high-hp-build/101222/49 "2016-06-30T13:51:56Z")
It’s been quite some time sense I have posted anything, mainly because I’ve gotten lazy and haven’t had the time with a growing family and work. Sorry for the excuses, but here’s a pic of the block, rods and crank on the operating table. [![](https://s31.postimg.org/6xc8bjvfb/image.jpg)](https://postimg.org/image/6xc8bjvfb/) [Previous page](https://forum.g2ic.com/t/92-db-ls-vtec-turbo-high-hp-build/101222.md?page=2)