# Auto to manual **URL:** \ **Category:** Hybrids & Advanced Aftermarket Engine Performance\ **Created:** [April 23, 2017, 2:17am UTC](https://forum.g2ic.com/t/auto-to-manual/102315 "2017-04-23T02:17:44Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![jazz112884](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/j/a88e57/32.png) [@jazz112884](https://forum.g2ic.com/u/jazz112884)\ **Post date:** [April 23, 2017, 2:17am UTC](https://forum.g2ic.com/t/auto-to-manual/102315/1 "2017-04-23T02:17:44Z")
did a auto to manual conversion and I’m not getting fuel out of my injectors, can hear the fuel pump run but my injectors are not spraying fuel ---
**Author:** ![2ndJenn](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/2/e0b2c6/32.png) [@2ndJenn](https://forum.g2ic.com/u/2ndJenn)\ **Post date:** [April 23, 2017, 3:01pm UTC](https://forum.g2ic.com/t/auto-to-manual/102315/2 "2017-04-23T15:01:37Z")
Fuel in the tank? Have you checked for fuel pressure ? If you have fuel pressure in the rail but not getting fuel in the cylinders the injectors are not opening. That is either an ECU or wiring problem. ---
**Author:** ![jazz112884](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/j/a88e57/32.png) [@jazz112884](https://forum.g2ic.com/u/jazz112884)\ **Post date:** [April 23, 2017, 10:34pm UTC](https://forum.g2ic.com/t/auto-to-manual/102315/3 "2017-04-23T22:34:14Z")
Got fuel.got fuel pressure. Ecu is good but the wiring I might have a mess any one have a picture of their wiring of the swap ---
**Author:** ![slackerintegra](https://forum.g2ic.com/user_avatar/forum.g2ic.com/slackerintegra/32/125_2.png) [@slackerintegra](https://forum.g2ic.com/u/slackerintegra)\ **Post date:** [May 11, 2017, 5:30am UTC](https://forum.g2ic.com/t/auto-to-manual/102315/4 "2017-05-11T05:30:08Z")
Check to see you’re getting 12v to the injector power wires. Check your fuel injector relay.