# Block Guard question?

**URL:** <https://forum.g2ic.com/t/block-guard-question/31311>\
**Category:** Hybrids & Advanced Aftermarket Engine Performance\
**Created:** [December 5, 2002, 10:09pm UTC](https://forum.g2ic.com/t/block-guard-question/31311 "2002-12-05T22:09:18Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gibson](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/g/f0a364/32.png) [@Gibson](https://forum.g2ic.com/u/Gibson)\
**Post date:** [December 5, 2002, 10:09pm UTC](https://forum.g2ic.com/t/block-guard-question/31311/1 "2002-12-05T22:09:18Z")

</div>

Well more of a just to make sure questoin when putting in a block guard you just set iton top and tap w/ a rubber malet right.

---

<div class="post-metadata">

**Author:** ![G2guru](https://forum.g2ic.com/user_avatar/forum.g2ic.com/g2guru/32/11_2.png) [@G2guru](https://forum.g2ic.com/u/G2guru)\
**Post date:** [December 5, 2002, 10:25pm UTC](https://forum.g2ic.com/t/block-guard-question/31311/2 "2002-12-05T22:25:06Z")

</div>

No… when putting in a block guard often what will happen is that the cylinder will “shift”. Even a 1 mil will cause problems. The proper way is to put the block guard in and have the cylinder bored and re-honed. Which means you’ll need new rings as well. I love how simple some people make “throwing in pistons” or “tapping in a block guard”. To do it right it takes a little more time, money, and patience.

---

<div class="post-metadata">

**Author:** ![Gibson](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/g/f0a364/32.png) [@Gibson](https://forum.g2ic.com/u/Gibson)\
**Post date:** [December 5, 2002, 10:42pm UTC](https://forum.g2ic.com/t/block-guard-question/31311/3 "2002-12-05T22:42:13Z")

</div>

well hey listen i am definetly not one that thinks that you can just through this in here and it will be fine and just so you do know the block has already be honed and new pistons and rings as well are in the engine. I was just asking a question.

---

<div class="post-metadata">

**Author:** ![G2guru](https://forum.g2ic.com/user_avatar/forum.g2ic.com/g2guru/32/11_2.png) [@G2guru](https://forum.g2ic.com/u/G2guru)\
**Post date:** [December 5, 2002, 11:08pm UTC](https://forum.g2ic.com/t/block-guard-question/31311/4 "2002-12-05T23:08:52Z")

</div>

I know… the “harshness” was not directed to you. It was more of venting on my part for some people with their “half assed” ways. And then they tell others that this “half assed” way is okay. Drives me nuts. Do it right or don’t do it… agreed?

---

<div class="post-metadata">

**Author:** ![DA9\_LS-t](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/d/a9a28c/32.png) [@DA9\_LS-t](https://forum.g2ic.com/u/DA9_LS-t)\
**Post date:** [December 5, 2002, 11:21pm UTC](https://forum.g2ic.com/t/block-guard-question/31311/5 "2002-12-05T23:21:52Z")

</div>

are u saying u tap the gaurd in and then have it overbored and honed?? no one has confirmed if welding the gaurd in has any benefit.

---

<div class="post-metadata">

**Author:** ![G2guru](https://forum.g2ic.com/user_avatar/forum.g2ic.com/g2guru/32/11_2.png) [@G2guru](https://forum.g2ic.com/u/G2guru)\
**Post date:** [December 5, 2002, 11:26pm UTC](https://forum.g2ic.com/t/block-guard-question/31311/6 "2002-12-05T23:26:44Z")

</div>

Yes, you at least need to have the bore of the cylinders checked to make sure they didn’t shift. If they did shift, then you need to bore/hone and re-ring the block. Who said anything about welding?

---

<div class="post-metadata">

**Author:** ![DA9\_LS-t](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/d/a9a28c/32.png) [@DA9\_LS-t](https://forum.g2ic.com/u/DA9_LS-t)\
**Post date:** [December 5, 2002, 11:30pm UTC](https://forum.g2ic.com/t/block-guard-question/31311/7 "2002-12-05T23:30:33Z")

</div>

ive heard a couple guys mention a while back when i first heard about them. i still dont know what the benefits are besides shifting around :shrug: or maybe sinking. im curious if anyones had these problems.

---

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [December 6, 2002, 2:27am UTC](https://forum.g2ic.com/t/block-guard-question/31311/8 "2002-12-06T02:27:45Z")

</div>

Whats the benefits of a block guard, just for the info and while we are on subject…
