# called in sick to work..... and did this **URL:** \ **Category:** Forced Induction\ **Created:** [May 16, 2005, 11:36pm UTC](https://forum.g2ic.com/t/called-in-sick-to-work-and-did-this/62021 "2005-05-16T23:36:16Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [May 16, 2005, 11:36pm UTC](https://forum.g2ic.com/t/called-in-sick-to-work-and-did-this/62021/1 "2005-05-16T23:36:16Z")
made a new downpipe to elimante my cat… and while I was at it I decided to install a egt… ![](http://www.blackteg.com/down1.JPG) ![](http://www.blackteg.com/down2.JPG) I know the egt is supposed to be on the third runner of the mani but this seemed easier and it is still before the turbo… hopefully it will be accurate. :hmm: ---
**Author:** ![toohott4handlin](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/9f8e36/32.png) [@toohott4handlin](https://forum.g2ic.com/u/toohott4handlin)\ **Post date:** [May 17, 2005, 12:56am UTC](https://forum.g2ic.com/t/called-in-sick-to-work-and-did-this/62021/2 "2005-05-17T00:56:01Z")
Ok, i see moroso pan, what looks like stage 3 axles, and what might possibly be an ls block. Whats your setup? ---
**Author:** ![toohott4handlin](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/9f8e36/32.png) [@toohott4handlin](https://forum.g2ic.com/u/toohott4handlin)\ **Post date:** [May 17, 2005, 12:57am UTC](https://forum.g2ic.com/t/called-in-sick-to-work-and-did-this/62021/3 "2005-05-17T00:57:12Z")
and is that the full race traction bar setup? ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [May 17, 2005, 1:26am UTC](https://forum.g2ic.com/t/called-in-sick-to-work-and-did-this/62021/4 "2005-05-17T01:26:08Z")
stock block ls inline pro mani mee own dp and charge pipes tial bov and wastegate gator axles fr traction bars t3t4 57 63 rc 440’s uberdata using osterich and wb tuned by me blox intake mani plus more that I am forgeting… ---
**Author:** ![Hondasi88](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/h/ac91a4/32.png) [@Hondasi88](https://forum.g2ic.com/u/Hondasi88)\ **Post date:** [May 17, 2005, 3:16am UTC](https://forum.g2ic.com/t/called-in-sick-to-work-and-did-this/62021/5 "2005-05-17T03:16:28Z")
i wish u could do mine…shops are here are charging like crazy just to connect my elbow with my flew pipe. ---
**Author:** ![Tchleung](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/48db29/32.png) [@Tchleung](https://forum.g2ic.com/u/Tchleung)\ **Post date:** [May 17, 2005, 3:59am UTC](https://forum.g2ic.com/t/called-in-sick-to-work-and-did-this/62021/6 "2005-05-17T03:59:30Z")
looking at your DP welds to the flange, you’re pretty handy with the tig 🙂 ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [May 18, 2005, 1:44am UTC](https://forum.g2ic.com/t/called-in-sick-to-work-and-did-this/62021/7 "2005-05-18T01:44:29Z")
whats a flew pipe? ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [May 18, 2005, 2:31am UTC](https://forum.g2ic.com/t/called-in-sick-to-work-and-did-this/62021/8 "2005-05-18T02:31:13Z")
How are you liking that blox IM? I just picked one up… ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [May 18, 2005, 3:07am UTC](https://forum.g2ic.com/t/called-in-sick-to-work-and-did-this/62021/9 "2005-05-18T03:07:22Z")
have you installed the blox intake mani yet? If not you will find that you will need to do several mods including a itr cable bracket, fuel rail studs… etc… basically its a itr copy with a ls flange. I also installed a hondata gasket and it seems like it works pretty good… but thats just my butt dyno