# Clutch cable ? (searched)

**URL:** <https://forum.g2ic.com/t/clutch-cable-searched/53615>\
**Category:** Stock Engine-Bay Components\
**Created:** [August 20, 2004, 4:13pm UTC](https://forum.g2ic.com/t/clutch-cable-searched/53615 "2004-08-20T16:13:24Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [August 20, 2004, 4:13pm UTC](https://forum.g2ic.com/t/clutch-cable-searched/53615/1 "2004-08-20T16:13:24Z")

</div>

I searched for an install guide for a clutch cable on a 1990 LS and I can’t find a descent one…does anyone have one? It doesn’t look that difficult but I just want to be sure of the procedure before I jump into it and get stranded :bang: TIA Jay

---

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [December 16, 2004, 11:57pm UTC](https://forum.g2ic.com/t/clutch-cable-searched/53615/2 "2004-12-16T23:57:58Z")

</div>

bump i need answer too

---

<div class="post-metadata">

**Author:** ![Armed\_Ferret](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/a/8491ac/32.png) [@Armed\_Ferret](https://forum.g2ic.com/u/Armed_Ferret)\
**Post date:** [December 17, 2004, 12:39am UTC](https://forum.g2ic.com/t/clutch-cable-searched/53615/3 "2004-12-17T00:39:29Z")

</div>

[www.helminc.com](http://www.helminc.com)

best book you’ll ever buy. 🆙

---

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [March 7, 2005, 11:11am UTC](https://forum.g2ic.com/t/clutch-cable-searched/53615/4 "2005-03-07T11:11:23Z")

</div>

I have the manual myself. But… what I’d like to know is if any of you guys done it? And how difficult might it be? Looks mighty cramped in the pedal area

---

<div class="post-metadata">

**Author:** ![Armed\_Ferret](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/a/8491ac/32.png) [@Armed\_Ferret](https://forum.g2ic.com/u/Armed_Ferret)\
**Post date:** [March 7, 2005, 12:38pm UTC](https://forum.g2ic.com/t/clutch-cable-searched/53615/5 "2005-03-07T12:38:47Z")

</div>

LOOKS cramped? have you tried getting down there and taking the cable out? very simple stuff–disconnect from transmission, disconnect from pedal. installation is the reverse.

if you need extra room down there, try removing the trim panel(s). gave me lots more room to work with.