Traded them for the slips n sold my other set cuz i needed the cash
Dang! Your tenth integra, now that’s an enthusiast. Sorry to hear about the lost parts. However the car seems to be coming along nicely. Goodluck on the build.
Yes actualy i gota another 2 after this one. And i might get another one for parts this week
ok so i gota garage at my new apartment and i braught the teggy closer to me so i can wrk on it. today i started to rewire the doors so that i have power locks
heres the door lock actuater
heres the wiring im replacing top is the old one bottom is the new wiring for the power locks
heres the wiring from the power locks
heres the original plug
the door with the old wires removed
pulled out the plug to install the new plug
new plug ran threw the well
had to ground the wiring
plug in place
new wiring ran on the door
new plug for the power locks
actuater installed
cleaned up some of the wiring
so now the passenger side is done. now i have to do the driver side pix up later
ok so yesterday i did the passenger side today i tackled the driver side.
heres the door before i touched it
the driver side actuater
the locks without the actuater
the single plug beforre i rewire the door locks
ran the wire through the fender wall
i removed the wiring from the door
i ran the new wiring
installed the door lock button
installed the actuater in the door
installed and plugged in the door locks relay
ordered a new 94 gsr shift knob and type r shift boot
ok so my motor blew in my other 4 dr so i decided ima finaly put her together so this weekend the motors getting dropped in so i started to do what i can with whats at my house. tom ima try and get her registered and ready so when i get her running i can just drive her. what do i gota do if the cars from otta state inspections? or a vin check?
so today i started to put back in the dash
kinda mocked up the type r shift boot
mounted the door speakers
memphis speakers
also i undid some electrical tape and found this bullshit
so tom im gona soder a oem harnes to it and not a walmart harnes.
also replaced the hood latch the old one was screwed up and didnt catch the hood
tom hopefully gettin all myparts from my friends garage so i can realy start putting her together
damn nice build. Even after everything you been through, your still managing to put together a clean ass teg. I need friends like that, that can do body work, my DA needs it badly. Keep up the build!
yeah well at this point i wish he wasnt a friend and i paid a stranger cuz i still dont have my mirrors door handles front and rear bumpers side skirts front lip bumper filler and ma gsr wing. realy annoyed with that but going to do everything i can besides that
Bbbuuummmppp bro glwb she looks like shes coming out good so far to be honest with u keep up the good work
need a bunch of sensorsfor her but here she is
and just some of the parts for her
picked up some of ma parts to put her together. put the gsr motor on hold for now wana build her the way i want and do it from ground up
bolted up ma exhaust
