# dizzy swap problem

**URL:** <https://forum.g2ic.com/t/dizzy-swap-problem/59785>\
**Category:** Stock Engine-Bay Components\
**Created:** [March 12, 2005, 1:14am UTC](https://forum.g2ic.com/t/dizzy-swap-problem/59785 "2005-03-12T01:14:56Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [March 12, 2005, 1:14am UTC](https://forum.g2ic.com/t/dizzy-swap-problem/59785/1 "2005-03-12T01:14:56Z")

</div>

i swapped in a obd1 distributor onto my b18b head thats on my b18a in my 1990 teg (turning into a monster :hmm: ) but my delemma is that after wiring the dizzy with the obd0 plugs and installed, it wont start. it will fire only on the first turn. after that its dead. i couldn’t find anyone with my problem :mad: heres my wiring guide i used:  
Engine Harness to OBD1 Distributor  
Peach to White  
White/Blue to White/Blue  
Blue/Yellow to Blue/Yellow  
Thin White to Peach  
Peach/Blue to Peach/Blue  
Blue/Green to Blue  
Fat White to Yellow/Green  
which i got from [http://www.88-crx.com/ZC%20CRX%20OBD0%20to%20OBD1%20Conversion%20and%20Distributor%20wiring.htm](http://www.88-crx.com/ZC%20CRX%20OBD0%20to%20OBD1%20Conversion%20and%20Distributor%20wiring.htm) i also confirmed it at a few other sites. im thinking either i can only use an obd1 dizzy with an obd1 ecu, or somethings not wired correct. any feedback will be appreciated. thanks, harry.
