# fuel injector **URL:** \ **Category:** Hybrids & Advanced Aftermarket Engine Performance\ **Created:** [May 19, 2009, 5:24pm UTC](https://forum.g2ic.com/t/fuel-injector/86829 "2009-05-19T17:24:32Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![xxfile](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/x/c57346/32.png) [@xxfile](https://forum.g2ic.com/u/xxfile)\ **Post date:** [May 19, 2009, 5:24pm UTC](https://forum.g2ic.com/t/fuel-injector/86829/1 "2009-05-19T17:24:32Z")
So my teg had a B18C1 swap by the previous owner, and few days earlier I realize that my fuel injectors are leaking fuel. I bought a injector seal kit from schucks and after I put in all of them, I have one seal left… one seal goes onto the connection between the block and the injector, one bigger one goes between the fuel rail and the top of the injector, and there’s a small o-ring thing that goes right on top of the injector. And I still have one left… am I missing something? ---
**Author:** ![Colin](https://forum.g2ic.com/user_avatar/forum.g2ic.com/colin/32/16_2.png) [@Colin](https://forum.g2ic.com/u/Colin)\ **Post date:** [May 20, 2009, 12:56am UTC](https://forum.g2ic.com/t/fuel-injector/86829/2 "2009-05-20T00:56:59Z")
Do you have one set of pieces left or only one single piece? Are you sure you installed all needed parts on each injector? This diagram shows all the pieces which are installed on/around the injector: ![](http://www.acuraautomotiveparts.org/acura/jsp/mws/catimgs/13sk70_e0301.gif) ---
**Author:** ![xxfile](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/x/c57346/32.png) [@xxfile](https://forum.g2ic.com/u/xxfile)\ **Post date:** [May 20, 2009, 4:27am UTC](https://forum.g2ic.com/t/fuel-injector/86829/3 "2009-05-20T04:27:27Z")
thank you!! when I took it appart, there was no #4…