# Good setup n/a

**URL:** <https://forum.g2ic.com/t/good-setup-n-a/101923>\
**Category:** Hybrids & Advanced Aftermarket Engine Performance\
**Created:** [May 10, 2016, 1:58am UTC](https://forum.g2ic.com/t/good-setup-n-a/101923 "2016-05-10T01:58:56Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Seth\_Edwards](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/s/a88e57/32.png) [@Seth\_Edwards](https://forum.g2ic.com/u/Seth_Edwards)\
**Post date:** [May 10, 2016, 1:58am UTC](https://forum.g2ic.com/t/good-setup-n-a/101923/1 "2016-05-10T01:58:56Z")

</div>

Bone stock 93 ls thinking about a n/a setup i could run  
Skunk2 pro exhaust  
Ws2 manifold and muffler with 2 1/2 inch pipe  
Port matched and polished  
Stage 2 crower cams/valves and springs

Is there anything I should change  
Have a very flexible budget

---

<div class="post-metadata">

**Author:** ![Mnda90](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/m/df788c/32.png) [@Mnda90](https://forum.g2ic.com/u/Mnda90)\
**Post date:** [May 14, 2016, 5:37am UTC](https://forum.g2ic.com/t/good-setup-n-a/101923/2 "2016-05-14T05:37:21Z")

</div>

Good clutch and solid mounts, aftermarket wideband and Hondata s300 with good tune

---

<div class="post-metadata">

**Author:** ![MyFirstDA9](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/m/4bbf92/32.png) [@MyFirstDA9](https://forum.g2ic.com/u/MyFirstDA9)\
**Post date:** [May 18, 2016, 2:47pm UTC](https://forum.g2ic.com/t/good-setup-n-a/101923/3 "2016-05-18T14:47:25Z")

</div>

if you want a good platform for something N/A i would definitely start by reducing the most amount of rotating mass ie. lighter flywheel, clutch. 2.5 is probably the largest exhaust size you wanna run. Could even consider a shorter geared ratio trans like a b16, give it a little more pep , however unless you plan to take apart that trans to put in a LS 5th gear or something, you are not going to enjoy highway driving. the port matching is a good idea, can choose a larger tb as well. if you’re increasing the amount of air in and out don’t forget about your fuel system.

---

<div class="post-metadata">

**Author:** ![92gsrlsvtec](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/9/d6d6ee/32.png) [@92gsrlsvtec](https://forum.g2ic.com/u/92gsrlsvtec)\
**Post date:** [May 18, 2016, 3:25pm UTC](https://forum.g2ic.com/t/good-setup-n-a/101923/4 "2016-05-18T15:25:56Z")

</div>

vtec or p8r B20 head flow so much better I’d start there.

---

<div class="post-metadata">

**Author:** ![mugenguy](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/m/85e7bf/32.png) [@mugenguy](https://forum.g2ic.com/u/mugenguy)\
**Post date:** [June 2, 2016, 7:44pm UTC](https://forum.g2ic.com/t/good-setup-n-a/101923/5 "2016-06-02T19:44:32Z")

</div>

b18 parts

if your interested im parting out my b18 , i have a set of crower 404 cams and a skunk2 intake manifold along with dual springs and titanium retainers and a few extra supporting mods , you can reach me at [edgargandara@yahoo.com](mailto:edgargandara@yahoo.com) , im letting it go for cheap

---

<div class="post-metadata">

**Author:** ![fd245](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/f/cab0a1/32.png) [@fd245](https://forum.g2ic.com/u/fd245)\
**Post date:** [June 3, 2016, 2:19am UTC](https://forum.g2ic.com/t/good-setup-n-a/101923/6 "2016-06-03T02:19:54Z")

</div>

Don’t forget for a brake upgrade.