# help with tails

**URL:** <https://forum.g2ic.com/t/help-with-tails/78449>\
**Category:** Exterior\
**Created:** [July 25, 2007, 10:36pm UTC](https://forum.g2ic.com/t/help-with-tails/78449 "2007-07-25T22:36:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![1996hondacivic](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/1/c89c15/32.png) [@1996hondacivic](https://forum.g2ic.com/u/1996hondacivic)\
**Post date:** [July 25, 2007, 10:36pm UTC](https://forum.g2ic.com/t/help-with-tails/78449/1 "2007-07-25T22:36:15Z")

</div>

i searched and found the way to clear the pink lines on 90-91 tails, so i was doing this process with a heat gun and it was a complete mess, i tried pulling and all it would to is stress out, then after a few minutes of heating it was geting to hot then i pulled apart and bam they broke right in half, is there any other way to remove these lines without taking them apart? aka a chemical that takes them clean away?

---

<div class="post-metadata">

**Author:** ![spikeymike](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/s/a3d4f5/32.png) [@spikeymike](https://forum.g2ic.com/u/spikeymike)\
**Post date:** [July 25, 2007, 10:46pm UTC](https://forum.g2ic.com/t/help-with-tails/78449/2 "2007-07-25T22:46:57Z")

</div>

Apparently you didn’t search hard enough.

[http://www.g2ic.com/forums/showthread.php?t=114284](http://www.g2ic.com/forums/showthread.php?t=114284)