# idle problem

**URL:** <https://forum.g2ic.com/t/idle-problem/21384>\
**Category:** Integra Help\
**Created:** [February 23, 2002, 3:22pm UTC](https://forum.g2ic.com/t/idle-problem/21384 "2002-02-23T15:22:21Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [February 23, 2002, 3:22pm UTC](https://forum.g2ic.com/t/idle-problem/21384/1 "2002-02-23T15:22:21Z")

</div>

B16 swap done recently, replaced cap/rotor with 90 integra cap/rotor. Replaced wires w/ Magnacore 8.5 racing wires. Cold Air intake also installed. Have a very low idle around 500. Tried screw on throttle body and it would only turn 1 revoultion counter clockwise (after screwing it in all the way). Was wondering how to get screw to loosen more to adjust idle?? There is plenty of anti-freeze in car. Havent yet looked at PCV. Could you help…
