# Ignition System Suggestions

**URL:** <https://forum.g2ic.com/t/ignition-system-suggestions/65034>\
**Category:** Product Reviews\
**Created:** [September 4, 2005, 6:25pm UTC](https://forum.g2ic.com/t/ignition-system-suggestions/65034 "2005-09-04T18:25:09Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [September 4, 2005, 6:25pm UTC](https://forum.g2ic.com/t/ignition-system-suggestions/65034/1 "2005-09-04T18:25:09Z")

</div>

I was wondering what components I should buy for my ignition system. I have decided to stick with my stock B18. I am planning in a full valvetrain buildup along with a set high compression pistons and upgraded rods. I was planning on an upgraded distributor cap, an upgraded ignition, and coil. My problem is I am not sure which ignitionto buy. I am aiming for about 200 whp, and it needs to be 100% streetable.

Thanks,  
Jason

---

<div class="post-metadata">

**Author:** ![spikeymike](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/s/a3d4f5/32.png) [@spikeymike](https://forum.g2ic.com/u/spikeymike)\
**Post date:** [September 4, 2005, 6:44pm UTC](https://forum.g2ic.com/t/ignition-system-suggestions/65034/2 "2005-09-04T18:44:53Z")

</div>

stock ignition system is all you need.

stock wires  
stock cap/rotor  
stock coil and ignitor.

stock can handle up to 300hp or so.

---

<div class="post-metadata">

**Author:** ![soontobe2ndGEN](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/s/5daacb/32.png) [@soontobe2ndGEN](https://forum.g2ic.com/u/soontobe2ndGEN)\
**Post date:** [September 4, 2005, 7:01pm UTC](https://forum.g2ic.com/t/ignition-system-suggestions/65034/3 "2005-09-04T19:01:14Z")

</div>

> [@spikeymike](#):
>
> stock ignition system is all you need.
> 
> stock wires  
> stock cap/rotor  
> stock coil and ignitor.
> 
> stock can handle up to 300hp or so.

🆙

but if anything i would suggest a MSD system

---

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [September 5, 2005, 5:30pm UTC](https://forum.g2ic.com/t/ignition-system-suggestions/65034/4 "2005-09-05T17:30:52Z")

</div>

I put a set of Superconductor wires on my car. No butt-dyno difference, but I know they’ll last a good while.

---

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [September 5, 2005, 6:12pm UTC](https://forum.g2ic.com/t/ignition-system-suggestions/65034/5 "2005-09-05T18:12:12Z")

</div>

Yeah I was at least going to replace my plug wires. I was lookin at the 8.5mm from MSD.

Jason
