# K tuned pro circuit-b-d-series-shifter review

**URL:** <https://forum.g2ic.com/t/k-tuned-pro-circuit-b-d-series-shifter-review/102627>\
**Category:** Interior\
**Created:** [June 27, 2018, 7:53pm UTC](https://forum.g2ic.com/t/k-tuned-pro-circuit-b-d-series-shifter-review/102627 "2018-06-27T19:53:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![djshado](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/d/f6c823/32.png) [@djshado](https://forum.g2ic.com/u/djshado)\
**Post date:** [June 27, 2018, 7:53pm UTC](https://forum.g2ic.com/t/k-tuned-pro-circuit-b-d-series-shifter-review/102627/1 "2018-06-27T19:53:55Z")

</div>

Just wondering anyone is running the k tuned pro circuit shifter. I am debating between the circuit [https://jhpusa.com/collections/shifter-extension/products/k-tuned-pro-circuit-b-d-series-shifter](https://jhpusa.com/collections/shifter-extension/products/k-tuned-pro-circuit-b-d-series-shifter) or the lean back shifter. [https://jhpusa.com/collections/shifter-extension/products/k-tuned-pro-circuit-2-lean-back-shifter-b-d-series](https://jhpusa.com/collections/shifter-extension/products/k-tuned-pro-circuit-2-lean-back-shifter-b-d-series).  
I am curretly runing a B&M shifter with 1320 performance shifter re locator and needing more height due to the racing seat. Seat sits further back and taller than stock.

---

<div class="post-metadata">

**Author:** ![billabongrob](https://forum.g2ic.com/user_avatar/forum.g2ic.com/billabongrob/32/62_2.png) [@billabongrob](https://forum.g2ic.com/u/billabongrob)\
**Post date:** [July 9, 2018, 2:15pm UTC](https://forum.g2ic.com/t/k-tuned-pro-circuit-b-d-series-shifter-review/102627/2 "2018-07-09T14:15:40Z")

</div>

I have the first one. I haven’t flogged it too much, but it seems pretty good. I do worry that it’ll snap at some point at full extension, so I’ll probably lower it down a little more. Will provide more feedback when available.

---

<div class="post-metadata">

**Author:** ![djshado](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/d/f6c823/32.png) [@djshado](https://forum.g2ic.com/u/djshado)\
**Post date:** [July 28, 2018, 2:47pm UTC](https://forum.g2ic.com/t/k-tuned-pro-circuit-b-d-series-shifter-review/102627/3 "2018-07-28T14:47:35Z")

</div>

Well after doing some searching I ended up replacing it. seems the location is comfortable for my liking. If i was to redo it, would go with the lean back due to where my seat sits. the adapter i was using previous to it ended up snapping the shifter where it threads into the adapter. thanks for the review. i will upload pics sometime in the future.

---

<div class="post-metadata">

**Author:** ![Eddy\_da9](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/e/91b2a8/32.png) [@Eddy\_da9](https://forum.g2ic.com/u/Eddy_da9)\
**Post date:** [August 21, 2018, 8:21am UTC](https://forum.g2ic.com/t/k-tuned-pro-circuit-b-d-series-shifter-review/102627/4 "2018-08-21T08:21:44Z")

</div>

I