# ls/vtec **URL:** \ **Category:** Hybrids & Advanced Aftermarket Engine Performance\ **Created:** [April 3, 2004, 8:10am UTC](https://forum.g2ic.com/t/ls-vtec/48678 "2004-04-03T08:10:55Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [April 3, 2004, 8:10am UTC](https://forum.g2ic.com/t/ls-vtec/48678/1 "2004-04-03T08:10:55Z")
well i’ve heard alot of stuff about that you can’t put a vtec head on a 90-91 integra and that you can put a vtec head on a 92-93 integra is that true and if so why? I’m planing to do this vtec head swap but not sure about some information and since i just cracked my transmisson yesterday im going to get another one and since im at the shop i might as well do the vtec head too…and i did search on this topic and didnt find the answer i was looking for… Getting my tramsmisson and maybe the vtec head done at south gate auto electric… ``` :dance: ``` ---
**Author:** ![KraZEtEggIE](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/k/dbc845/32.png) [@KraZEtEggIE](https://forum.g2ic.com/u/KraZEtEggIE)\ **Post date:** [April 3, 2004, 8:37am UTC](https://forum.g2ic.com/t/ls-vtec/48678/2 "2004-04-03T08:37:03Z")
its harder to find an obd0 distributer and u would need it to run a vtec head on a 90-91 otherwise same shit. ---
**Author:** ![nickgmiller04](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/n/91b2a8/32.png) [@nickgmiller04](https://forum.g2ic.com/u/nickgmiller04)\ **Post date:** [April 3, 2004, 3:09pm UTC](https://forum.g2ic.com/t/ls-vtec/48678/3 "2004-04-03T15:09:43Z")
did you look at the lsvtec conversion in the teg tips section??? thats a pretty good writeup. also go to [http://www.hondaswap.com](http://www.hondaswap.com) thats also a good writeup. and the golden eagle lsvtec complete kit looks like a pretty good product, no tapping and drilling. thats on group buy center.