# Maxrev kit, finally boosted! **URL:** \ **Category:** Forced Induction\ **Created:** [March 30, 2003, 11:34pm UTC](https://forum.g2ic.com/t/maxrev-kit-finally-boosted/36186 "2003-03-30T23:34:18Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [March 30, 2003, 11:34pm UTC](https://forum.g2ic.com/t/maxrev-kit-finally-boosted/36186/1 "2003-03-30T23:34:18Z")
My previous setup on a '91 b18a motor (yes I have a 92 DA, don’t ask): —aem cai —Tanabe Hyper Medallion exhaust —everything else stock = 118 hp, 118 lb/ft. torque at the wheels My new setup: —Maxrev kit —t3/t04e, 57 trim, 63 a/r —Tial 35mm wastegate set at 6.5 psi —440 cc injectors —Hondata s200 —walbro 255lph = 192 hp, 173 lb/ft. of torque at the wheels Props to… Ralphy at DRT in Queens, NYC for tuning (cool guys), Tcoupe351 (honda-tech member) for ¥¥¥¥ing me put the kit in (correction, he put a lot of the kit in ), and of course, honda-tech. I’ve got a couple more little quirks to work out, but she drives like stock, off boost. I’ll get pics soon! ---
**Author:** ![Stu](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/s/3ec8ea/32.png) [@Stu](https://forum.g2ic.com/u/Stu)\ **Post date:** [March 30, 2003, 11:52pm UTC](https://forum.g2ic.com/t/maxrev-kit-finally-boosted/36186/2 "2003-03-30T23:52:15Z")
Sweet, it’s nice to see more turbo guys. Do you have an intercooler? If you do, could you take some speacial pics of that? ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [March 31, 2003, 1:20am UTC](https://forum.g2ic.com/t/maxrev-kit-finally-boosted/36186/3 "2003-03-31T01:20:28Z")
That cool you went from loosing 12hp to gaining 62.but I think you need some more tuning, they say with the bolt on drag kit you should gain around 100hp. With the hondata you have more tuning ability But I am not sure you have an intercooler or not. ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [March 31, 2003, 1:39am UTC](https://forum.g2ic.com/t/maxrev-kit-finally-boosted/36186/4 "2003-03-31T01:39:18Z")
Where’d you get 62 hp? 192 minus 118 is 75 hp. I do have an intercooler, but my exhaust is only 60mm (2.36 inches). Also, the cat is 2.0 inch (supposedly higher flowing, but I doubt it, it was cheap) so their’s a bottle neck too. I also asked him to keep the tune conservative, thus a little rich because I drive a lot miles daily. That’s my logic, but you could be right. In the future I might do a whole 3 inch setup, downpipe to catback, build the motor, and up the boost. However, that’ll be a looooong way from now as I have a baby on the way soon 👏. ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [March 31, 2003, 1:55am UTC](https://forum.g2ic.com/t/maxrev-kit-finally-boosted/36186/5 "2003-03-31T01:55:26Z")
130stock - 12 =118hp 130stock - 192= 62hp I figured since you took off the cai and exhaust (or changed)you put on you gained 12 so you were back to your 130. 130 + 62 = 192 I was just thinking over stock. You can get a few more pounds out of that setup. But I understand what your talking about. good luck ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [March 31, 2003, 2:10am UTC](https://forum.g2ic.com/t/maxrev-kit-finally-boosted/36186/6 "2003-03-31T02:10:52Z")
The 118 and the 192 are both measured at the wheels. Anyway, I think I’ll try a few more pounds:naughty: ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [March 31, 2003, 2:37am UTC](https://forum.g2ic.com/t/maxrev-kit-finally-boosted/36186/7 "2003-03-31T02:37:04Z")
hey, did you resleeve or get New pistons or anything? what kinda FMS u got ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [March 31, 2003, 2:52am UTC](https://forum.g2ic.com/t/maxrev-kit-finally-boosted/36186/8 "2003-03-31T02:52:05Z")
Nope, stock block. I have the Hondata s200. ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [March 31, 2003, 3:01am UTC](https://forum.g2ic.com/t/maxrev-kit-finally-boosted/36186/9 "2003-03-31T03:01:45Z")
how much was the s200? hows she running, whats ur CR do u worry about crackin ur sleeves? ---
**Author:** ![Stu](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/s/3ec8ea/32.png) [@Stu](https://forum.g2ic.com/u/Stu)\ **Post date:** [March 31, 2003, 9:27am UTC](https://forum.g2ic.com/t/maxrev-kit-finally-boosted/36186/10 "2003-03-31T09:27:24Z")
[http://www.hondata.com/](http://www.hondata.com/)