# need an engine swap guide **URL:** \ **Category:** Stock Engine-Bay Components\ **Created:** [April 2, 2004, 5:30am UTC](https://forum.g2ic.com/t/need-an-engine-swap-guide/48635 "2004-04-02T05:30:04Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [April 2, 2004, 5:30am UTC](https://forum.g2ic.com/t/need-an-engine-swap-guide/48635/1 "2004-04-02T05:30:04Z")
i have a 1990 acura integra gs. came with a B18A1 with a 5 speed manual, non-obd. anyone have an engine swap guide to switch this engine with a 92 LS engine B18A1 obd-1? i didnt find it in teg tips, but that info listed in those is what i am looking for. what i need to change, rewire, etc. thanks! ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [April 2, 2004, 8:27am UTC](https://forum.g2ic.com/t/need-an-engine-swap-guide/48635/2 "2004-04-02T08:27:59Z")
Put the two engines side by side. Anything that is different between the two, switch over. ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [April 3, 2004, 11:57am UTC](https://forum.g2ic.com/t/need-an-engine-swap-guide/48635/3 "2004-04-03T11:57:36Z")
there are very few diff.s it will drop right in of course but you will have to use the obd-0 harness and keep your fuel injectors from the old motor and use you original dizzy. ---
**Author:** ![Gigarange](https://forum.g2ic.com/user_avatar/forum.g2ic.com/gigarange/32/12_2.png) [@Gigarange](https://forum.g2ic.com/u/Gigarange)\ **Post date:** [April 3, 2004, 12:13pm UTC](https://forum.g2ic.com/t/need-an-engine-swap-guide/48635/4 "2004-04-03T12:13:19Z")
there’s also a couple of sensors off the back that you’ll have to swap off your '90 motor onto the '92 motor, if you use the obd-0 harness. The holes are already there for them you just have to take the plugs out that are in them and put in the sensors.