# Need help. B20b

**URL:** <https://forum.g2ic.com/t/need-help-b20b/102022>\
**Category:** Stock Engine-Bay Components\
**Created:** [July 4, 2016, 3:13pm UTC](https://forum.g2ic.com/t/need-help-b20b/102022 "2016-07-04T15:13:17Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![DeeVeeEss](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/d/a5b964/32.png) [@DeeVeeEss](https://forum.g2ic.com/u/DeeVeeEss)\
**Post date:** [July 4, 2016, 3:13pm UTC](https://forum.g2ic.com/t/need-help-b20b/102022/1 "2016-07-04T15:13:17Z")

</div>

I know this is not a stock motor. But still need help. Im doing the water pump and cnat get the water pump to come off. Even hit it with a inpack wrench.not a real big one mabye middle size.any idaes.

---

<div class="post-metadata">

**Author:** ![hatchbackkid82](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/h/c6cbf5/32.png) [@hatchbackkid82](https://forum.g2ic.com/u/hatchbackkid82)\
**Post date:** [July 8, 2016, 11:55am UTC](https://forum.g2ic.com/t/need-help-b20b/102022/2 "2016-07-08T11:55:17Z")

</div>

Try a rubber mallet on the water pump?

---

<div class="post-metadata">

**Author:** ![Prof007](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/p/ecb155/32.png) [@Prof007](https://forum.g2ic.com/u/Prof007)\
**Post date:** [July 8, 2016, 9:18pm UTC](https://forum.g2ic.com/t/need-help-b20b/102022/3 "2016-07-08T21:18:23Z")

</div>

+Rubber mallet. Unless someone used JB weld on that thing (and all the bolts are removed), a couple of light whacks with the mallet should knock it loose.

---

<div class="post-metadata">

**Author:** ![hatchbackkid82](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/h/c6cbf5/32.png) [@hatchbackkid82](https://forum.g2ic.com/u/hatchbackkid82)\
**Post date:** [July 13, 2016, 1:29pm UTC](https://forum.g2ic.com/t/need-help-b20b/102022/4 "2016-07-13T13:29:54Z")

</div>

Any luck?