# Pins to Short to Test A/C switch?

**URL:** <https://forum.g2ic.com/t/pins-to-short-to-test-a-c-switch/37746>\
**Category:** Electrical & Entertainment Systems\
**Created:** [May 6, 2003, 8:19pm UTC](https://forum.g2ic.com/t/pins-to-short-to-test-a-c-switch/37746 "2003-05-06T20:19:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [May 6, 2003, 8:19pm UTC](https://forum.g2ic.com/t/pins-to-short-to-test-a-c-switch/37746/1 "2003-05-06T20:19:22Z")

</div>

hi-  
When I have the A/C-Fan Switch assembly taken out… If I plug in only the fan part of the switch into the dash (to control the fan speeds), is there two pins that I can short on the A/C switch connector that is on the dash side of circuit to test it? If I could find an answer to this it would REALLY help. I am really wondering if I need to get a new compressor, diode, thermostat, or wiring on the A/C system. Thank you

-Dustin

---

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [May 7, 2003, 11:10am UTC](https://forum.g2ic.com/t/pins-to-short-to-test-a-c-switch/37746/2 "2003-05-07T11:10:11Z")

</div>

bump

---

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [May 8, 2003, 6:52pm UTC](https://forum.g2ic.com/t/pins-to-short-to-test-a-c-switch/37746/3 "2003-05-08T18:52:30Z")

</div>

Delete this

Mod, Please feel free to delete this thread… I found the answer to my question in the helms manual.