# PVC Hose Help **URL:** \ **Category:** Stock Engine-Bay Components\ **Created:** [December 5, 2002, 1:49pm UTC](https://forum.g2ic.com/t/pvc-hose-help/31285 "2002-12-05T13:49:24Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [December 5, 2002, 1:49pm UTC](https://forum.g2ic.com/t/pvc-hose-help/31285/1 "2002-12-05T13:49:24Z")
Why would my PVC Valve hose on my car be sucked flat… My guess it’s not sucking from the breather chamber… It was hard to connect the tubing when reinstalling my head but I believe I did get them together… I removed the hose and pluged the nipple that goes into the intake and the car dies… Any ideas about the hose? ---
**Author:** ![XDEep](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/x/3da27b/32.png) [@XDEep](https://forum.g2ic.com/u/XDEep)\ **Post date:** [December 5, 2002, 2:34pm UTC](https://forum.g2ic.com/t/pvc-hose-help/31285/2 "2002-12-05T14:34:29Z")
what kind of hose did you use? i found that the clear silicon hose from home depot, even the high pressure ones, dont hold up well after a while. gotta use fuel line hose or better from pep boys. ---
**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\ **Post date:** [December 5, 2002, 2:36pm UTC](https://forum.g2ic.com/t/pvc-hose-help/31285/3 "2002-12-05T14:36:09Z")
Hose It’s the factory hose… I guess I should replace the vlave and the hose… ---
**Author:** ![XDEep](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/x/3da27b/32.png) [@XDEep](https://forum.g2ic.com/u/XDEep)\ **Post date:** [December 5, 2002, 2:55pm UTC](https://forum.g2ic.com/t/pvc-hose-help/31285/4 "2002-12-05T14:55:18Z")
ya never hurts. and only a few bucks