# Removing Pink Linesin 90 tails w/ pics!!

**URL:** <https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757>\
**Category:** Articles / Teg Tips\
**Created:** [February 11, 2007, 1:10am UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757 "2007-02-11T01:10:47Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![HybridSeed](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/h/977dab/32.png) [@HybridSeed](https://forum.g2ic.com/u/HybridSeed)\
**Post date:** [February 26, 2008, 5:21pm UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/21 "2008-02-26T17:21:32Z")

</div>

i just used hot water and some regular bleach :bowthank:

---

<div class="post-metadata">

**Author:** ![slackerintegra](https://forum.g2ic.com/user_avatar/forum.g2ic.com/slackerintegra/32/125_2.png) [@slackerintegra](https://forum.g2ic.com/u/slackerintegra)\
**Post date:** [February 28, 2008, 4:21am UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/22 "2008-02-28T04:21:10Z")

</div>

i just did my bad set of 90-91 db1 tails…just bleach, let sit in 3 different position to get the WHOLE light about 12hrs each…didn’t take gasket or anything off…

now i fucked up my JDM 90-91 tails by trying to heat up the plastic and get to the freaking silicone…so gay…i used a heat gun too…may just bake them if i can do that correctly, otherwise i’m slapping some silicone back under the plastic and C-clamping the light & just puring bleach into them…pretty pissed…

---

<div class="post-metadata">

**Author:** ![xlocxvx](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/x/7ea924/32.png) [@xlocxvx](https://forum.g2ic.com/u/xlocxvx)\
**Post date:** [March 26, 2008, 1:22am UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/23 "2008-03-26T01:22:05Z")

</div>

i have 4 90-91 tail lights and tried to bleach all 4. only 2 came out clean while the other 2 still are a bit pinkish. the gay thing is that the ones that came out clean were both the driver side tail lights. i guess i’m gonna rebleach the passenger ones again today and see if i get better results.

---

<div class="post-metadata">

**Author:** ![Ricextacy](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/r/958977/32.png) [@Ricextacy](https://forum.g2ic.com/u/Ricextacy)\
**Post date:** [March 26, 2008, 4:00am UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/24 "2008-03-26T04:00:50Z")

</div>

dude, go to walmart in milpitas. they got dat purple stuff!

---

<div class="post-metadata">

**Author:** ![slackerintegra](https://forum.g2ic.com/user_avatar/forum.g2ic.com/slackerintegra/32/125_2.png) [@slackerintegra](https://forum.g2ic.com/u/slackerintegra)\
**Post date:** [March 26, 2008, 4:42am UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/25 "2008-03-26T04:42:35Z")

</div>

bleach works just fine, i guess don’t use that cheap shit! use non-diluted bleach & let it sit for about 8 hours & i guarantee it will dye the pink lines white…so maybe you’re adding water to your bleach, maybe your using cheap bleach, or mabe you’re not letting it sit long enough…

---

<div class="post-metadata">

**Author:** ![xlocxvx](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/x/7ea924/32.png) [@xlocxvx](https://forum.g2ic.com/u/xlocxvx)\
**Post date:** [March 26, 2008, 4:53am UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/26 "2008-03-26T04:53:44Z")

</div>

im guessing i didn’t leave them soaking long enough. i just don’t get why the driver side tail lights turned white so fast.

---

<div class="post-metadata">

**Author:** ![slackerintegra](https://forum.g2ic.com/user_avatar/forum.g2ic.com/slackerintegra/32/125_2.png) [@slackerintegra](https://forum.g2ic.com/u/slackerintegra)\
**Post date:** [March 26, 2008, 6:06am UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/27 "2008-03-26T06:06:24Z")

</div>

paint application was maybe applied different/stronger/more…you never know with that stuff LOL & you have to figure a different amount of wear too…so who knows

---

<div class="post-metadata">

**Author:** ![xlocxvx](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/x/7ea924/32.png) [@xlocxvx](https://forum.g2ic.com/u/xlocxvx)\
**Post date:** [March 26, 2008, 6:08am UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/28 "2008-03-26T06:08:25Z")

</div>

yeah who knows. thanks for the help though. the lights are soaking right now. hopefully when i wake up, they’ll be white.

---

<div class="post-metadata">

**Author:** ![Ricextacy](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/r/958977/32.png) [@Ricextacy](https://forum.g2ic.com/u/Ricextacy)\
**Post date:** [March 26, 2008, 6:08am UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/29 "2008-03-26T06:08:28Z")

</div>

sit for 8 hours?? wtf, that purple stuff works with the first swoosh!

---

<div class="post-metadata">

**Author:** ![JDM1nt2B](https://forum.g2ic.com/user_avatar/forum.g2ic.com/jdm1nt2b/32/109_2.png) [@JDM1nt2B](https://forum.g2ic.com/u/JDM1nt2B)\
**Post date:** [March 26, 2008, 3:20pm UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/30 "2008-03-26T15:20:36Z")

</div>

I think sometimes it has to do with how much the car sat out in the sun compared to a garaged car. More sun baked tail lights would probably turn white easier. But I don’t know why one side more than the other. Mine both turned white really easily. They were tail lights that a car sat out side, lenses were kinda dull looking too so I wet santed them down and clear coated them

---

<div class="post-metadata">

**Author:** ![HybridSeed](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/h/977dab/32.png) [@HybridSeed](https://forum.g2ic.com/u/HybridSeed)\
**Post date:** [March 26, 2008, 4:05pm UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/31 "2008-03-26T16:05:33Z")

</div>

lol dang alot of u guys let it sit forever haha i just used boiling water and some bleach let it sit for mabe 3-5 mins swooshed it around and repeated one more time and done

---

<div class="post-metadata">

**Author:** ![slackerintegra](https://forum.g2ic.com/user_avatar/forum.g2ic.com/slackerintegra/32/125_2.png) [@slackerintegra](https://forum.g2ic.com/u/slackerintegra)\
**Post date:** [March 26, 2008, 4:49pm UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/32 "2008-03-26T16:49:41Z")

</div>

JDM1nt2B-

valid point

but anyways…I left them in there so long because i put bleech in them at night, then fell alseep…as easy as that. So 8 hours worked just fine, since I was in no hurry

---

<div class="post-metadata">

**Author:** ![Ricextacy](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/r/958977/32.png) [@Ricextacy](https://forum.g2ic.com/u/Ricextacy)\
**Post date:** [March 26, 2008, 8:09pm UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/33 "2008-03-26T20:09:56Z")

</div>

how about this, use some purple stuff, get it done in mins

sleep and let it dry, when u wake up. u can slap em on.

---

<div class="post-metadata">

**Author:** ![xlocxvx](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/x/7ea924/32.png) [@xlocxvx](https://forum.g2ic.com/u/xlocxvx)\
**Post date:** [March 26, 2008, 9:13pm UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/34 "2008-03-26T21:13:19Z")

</div>

> [@HybridSeed;1844326](#):
>
> lol dang alot of u guys let it sit forever haha i just used boiling water and some bleach let it sit for mabe 3-5 mins swooshed it around and repeated one more time and done

yeah the driver sides finished within 15 minutes thats why i still don’t understand why the passengers are still a bit pinkish.

---

<div class="post-metadata">

**Author:** ![cruizer](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/c/eb9ed0/32.png) [@cruizer](https://forum.g2ic.com/u/cruizer)\
**Post date:** [April 15, 2008, 11:28pm UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/35 "2008-04-15T23:28:17Z")

</div>

i used the purple stuff…shake it around for about 3 minutes and presto!

![](http://i119.photobucket.com/albums/o138/cruizer298/HPIM1541-1.jpg)

---

<div class="post-metadata">

**Author:** ![DAnthony9](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/d/9fc29f/32.png) [@DAnthony9](https://forum.g2ic.com/u/DAnthony9)\
**Post date:** [May 13, 2008, 2:32pm UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/36 "2008-05-13T14:32:58Z")

</div>

did the same job with the Super Clean. Each light came out very clean. TO help the draining of the water, I drilled a hole from the bottom end where it curves.  
 ![](http://img152.imageshack.us/img152/7674/p1010049nw5.jpg)

![](http://img111.imageshack.us/img111/5803/p1010045uv3.jpg)

---

<div class="post-metadata">

**Author:** ![hybrid90](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/h/58956e/32.png) [@hybrid90](https://forum.g2ic.com/u/hybrid90)\
**Post date:** [October 1, 2008, 10:55pm UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/37 "2008-10-01T22:55:57Z")

</div>

^^ Damn looks awesome! About drilling holes in the housing… wouldn’t condensation get in there and cloud up your lights? I hope you sealed the holes back up with some sealant.

---

<div class="post-metadata">

**Author:** ![91DA9TEG](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/9/b38774/32.png) [@91DA9TEG](https://forum.g2ic.com/u/91DA9TEG)\
**Post date:** [October 4, 2008, 12:06am UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/38 "2008-10-04T00:06:08Z")

</div>

[QUOTE=DAnthony9;1870559]did the same job with the Super Clean. Each light came out very clean. TO help the draining of the water, I drilled a hole from the bottom end where it curves.  
 ![](http://forums.g2ic.com/images/imported/2008/05/6.jpg)

![](http://forums.g2ic.com/images/imported/2008/05/6.jpg)[/QUOTE]

where did u get that “HONDA” badge??

---

<div class="post-metadata">

**Author:** ![BacardiBreezer](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/b/34f0e0/32.png) [@BacardiBreezer](https://forum.g2ic.com/u/BacardiBreezer)\
**Post date:** [October 5, 2008, 10:50pm UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/39 "2008-10-05T22:50:07Z")

</div>

Not only will the tails leak, you will get a ton of water in your trunk and it may cause things to rust out. Just not a good idea.

---

<div class="post-metadata">

**Author:** ![ackoncrack](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/a/bbce88/32.png) [@ackoncrack](https://forum.g2ic.com/u/ackoncrack)\
**Post date:** [October 11, 2008, 9:05pm UTC](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757/40 "2008-10-11T21:05:49Z")

</div>

…

[QUOTE=cruizer;1856033]i used the purple stuff…shake it around for about 3 minutes and presto!

![](http://forums.g2ic.com/images/imported/2008/04/1.jpg)[/QUOTE]  
  
dammm kid your shit is ready for offroading

[Previous page](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757.md?page=1)

[Next page](https://forum.g2ic.com/t/removing-pink-linesin-90-tails-w-pics/75757.md?page=3)
