# Resorting Bumper Lights

**URL:** <https://forum.g2ic.com/t/resorting-bumper-lights/100310>\
**Category:** Articles / Teg Tips\
**Created:** [June 8, 2014, 6:58pm UTC](https://forum.g2ic.com/t/resorting-bumper-lights/100310 "2014-06-08T18:58:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![brentpadgett](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/b/5f8ce5/32.png) [@brentpadgett](https://forum.g2ic.com/u/brentpadgett)\
**Post date:** [June 8, 2014, 6:58pm UTC](https://forum.g2ic.com/t/resorting-bumper-lights/100310/1 "2014-06-08T18:58:39Z")

</div>

Here is a step by step how to restore your cloudy bumper lights  
[![](http://i1101.photobucket.com/albums/g431/brentpadgett/Mobile%20Uploads/1D6358DF-7691-49AF-AD20-77F27A1CA6F6.jpg)](http://s1101.photobucket.com/user/brentpadgett/media/Mobile%20Uploads/1D6358DF-7691-49AF-AD20-77F27A1CA6F6.jpg.html)

Tools you need  
1500 & 2000 sand paper  
Spray Bottle (water and dish soap)  
Rubbing Compund (3M is what I use)  
MultiSpeed Polisher (what I use to polish the light not nessiary)  
UV Protector and Sealer (Turtle Wax headlight UV Sealer is what I used)  
Step 1: Clean off any dirt and grime  
Step 2: Spray water on light and 1500 grit sand paper.  
Step 3: Begin sanding back and forth on the light. Keep paper and light wet during sanding.  
[![](http://i1101.photobucket.com/albums/g431/brentpadgett/Mobile%20Uploads/BDE06DD6-E42F-4D6E-A055-66F4439EDB1D.jpg)](http://s1101.photobucket.com/user/brentpadgett/media/Mobile%20Uploads/BDE06DD6-E42F-4D6E-A055-66F4439EDB1D.jpg.html)  
Here is a pic of what it’s should look like after sanding with 1500!  
Step 4: Repeat step 3 but with 2000 grit sand paper  
[![](http://i1101.photobucket.com/albums/g431/brentpadgett/Mobile%20Uploads/18C767A0-D26F-450B-87CF-F583E7CF931E.jpg)](http://s1101.photobucket.com/user/brentpadgett/media/Mobile%20Uploads/18C767A0-D26F-450B-87CF-F583E7CF931E.jpg.html)  
AFTER WET SANDING WITH 2000  
Step 5: Using Rubbing Compound polish out the hazy light until clear and seal it with a UV blocker  
[![](http://i1101.photobucket.com/albums/g431/brentpadgett/Mobile%20Uploads/9EC3029B-7CAE-48EE-B2DB-AD16439E465D.jpg)](http://s1101.photobucket.com/user/brentpadgett/media/Mobile%20Uploads/9EC3029B-7CAE-48EE-B2DB-AD16439E465D.jpg.html)  
Finished product next to unfinished

This will work for other light such as headlight and possibly taillights
