# right front wheel is pushed back alittle?? **URL:** \ **Category:** Suspension, Brakes & Wheels\ **Created:** [November 23, 2015, 11:11pm UTC](https://forum.g2ic.com/t/right-front-wheel-is-pushed-back-alittle/101665 "2015-11-23T23:11:36Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![bendogz](https://forum.g2ic.com/user_avatar/forum.g2ic.com/bendogz/32/161_2.png) [@bendogz](https://forum.g2ic.com/u/bendogz)\ **Post date:** [November 23, 2015, 11:11pm UTC](https://forum.g2ic.com/t/right-front-wheel-is-pushed-back-alittle/101665/1 "2015-11-23T23:11:36Z")
nothing looks bent or loose? what could be wrong or adjusted? ![46001d1430714060-89-90-db1-uploadfromtaptalk1385307936155.jpg](https://forum.g2ic.com/uploads/default/original/2X/0/02ab85ad2cdcea0fb964e0d9ceb99fe2d8f94627.jpeg) ![Picture 013.jpg](https://forum.g2ic.com/uploads/default/original/2X/a/aa8c08be5784c4c052622cf284d0709522f8ca11.jpeg) ![TMrLg6G.jpg](https://forum.g2ic.com/uploads/default/original/2X/6/68c8246673f5003e0c40d3971a6a00f7022afc54.jpeg) ---
**Author:** ![Colin](https://forum.g2ic.com/user_avatar/forum.g2ic.com/colin/32/16_2.png) [@Colin](https://forum.g2ic.com/u/Colin)\ **Post date:** [November 24, 2015, 12:01am UTC](https://forum.g2ic.com/t/right-front-wheel-is-pushed-back-alittle/101665/2 "2015-11-24T00:01:39Z")
I’m assuming you have a stock crossmember and not an aftermarket one? And that you have the stock radius rods, not modified ones? If nothing looks obviously bent then check your bushings, most specifically the LCA bushings and the radius rod bushings which are located in the front crossmember. ---
**Author:** ![bendogz](https://forum.g2ic.com/user_avatar/forum.g2ic.com/bendogz/32/161_2.png) [@bendogz](https://forum.g2ic.com/u/bendogz)\ **Post date:** [November 27, 2015, 7:35pm UTC](https://forum.g2ic.com/t/right-front-wheel-is-pushed-back-alittle/101665/3 "2015-11-27T19:35:31Z")
> [@Colin;2331269](#): > > I’m assuming you have a stock crossmember and not an aftermarket one? And that you have the stock radius rods, not modified ones? If nothing looks obviously bent then check your bushings, most specifically the LCA bushings and the radius rod bushings which are located in the front crossmember. stock crossmember and stock radius rod. will check the bushings. is the radius bar adjustable? thanks. ---
**Author:** ![Colin](https://forum.g2ic.com/user_avatar/forum.g2ic.com/colin/32/16_2.png) [@Colin](https://forum.g2ic.com/u/Colin)\ **Post date:** [November 27, 2015, 8:43pm UTC](https://forum.g2ic.com/t/right-front-wheel-is-pushed-back-alittle/101665/4 "2015-11-27T20:43:31Z")
No, the radius rods are not adjustable (Caster is not adjustable). I’ve seen people use radius rods from other vehicles modified to fit which are adjustable though. I forget which chassis they were from, but I want to say it was a Legend or Accord. ---
**Author:** ![turboda4dr](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/t/cab0a1/32.png) [@turboda4dr](https://forum.g2ic.com/u/turboda4dr)\ **Post date:** [November 28, 2015, 12:27am UTC](https://forum.g2ic.com/t/right-front-wheel-is-pushed-back-alittle/101665/5 "2015-11-28T00:27:14Z")
i think is 94-95 accord. but not 100% sure. if you buy k-tune traction bar they are adjustable. ---
**Author:** ![slackerintegra](https://forum.g2ic.com/user_avatar/forum.g2ic.com/slackerintegra/32/125_2.png) [@slackerintegra](https://forum.g2ic.com/u/slackerintegra)\ **Post date:** [February 14, 2016, 11:24am UTC](https://forum.g2ic.com/t/right-front-wheel-is-pushed-back-alittle/101665/6 "2016-02-14T11:24:30Z")
Sorry to bring this thread back from the dead, but had this happen to me in earlier 2015 & figured I could save someone some time. I had my passenger tire, pulled back? similar to the picture in OP post. It would rub against the back of the mud flap/wheel well when I stopped. Found out it was missing the Radius rod shim & nut. Look at the pic I supplied, it’s circled in red TO THE RIGHT! ![rr.png](https://forum.g2ic.com/uploads/default/original/2X/f/f19f37638a1b7a1e031802cd384dbcc2e915a974.png) ---
**Author:** ![92gsrlsvtec](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/9/d6d6ee/32.png) [@92gsrlsvtec](https://forum.g2ic.com/u/92gsrlsvtec)\ **Post date:** [February 23, 2016, 10:30pm UTC](https://forum.g2ic.com/t/right-front-wheel-is-pushed-back-alittle/101665/7 "2016-02-23T22:30:02Z")
I also had a radius rod loosen off one time. I replaced the bushings with urethane after that to improve handling and reduce wheel hop.