post up what tools we need iam sure i can get some
i hope this meet isnt far from san jose:)
basic, screwdriver, 10mm, 12mm, 14mm, short & deep sockets, really long extension to get through the bumper light to pull the bumper off…
masking tape, (forgot the name of it, it peels metal in strips…), a drill, 1/2 inch metal drill bit, metal file (for cleaning off sharp edges), measure tape, permanent marker…
all i can think of at the moment…
i can get my hands on a dremel set, so we can use that to cut the pattern out. oh yah baby, nice straight cuts!
oh yeah, i heart you too todd and kev too. oouuu kinky?!
haha
eye hart yoo 2…
but… my girlfriend wouldnt like that 
dremel set to cut a square pattern? umm… i guess we can try that… hehe…
don’t worry kev it won’t get weird. i won’t tell my wife if you don’t tell your girlfriend.
<cue>70’s pron music</cue>
i figure with the metal cutting disc we could cut straighter and cleaner after we drill holes in the corners and what not. oh yeah we need some shop glasses, don’t need metal flying all over the place and into someone’s eyes.
Originally posted by mav3rick478
[B]
<cue>70’s pron music</cue>
don’t need metal flying all over the place and into someone’s eyes. [/B]
bow chicka bow bow…
:werd: on the metal shiz…
ok kev, i’m bringin my boobie tassles to the meet just for you, muuuuahahahaha.
so whens a good date for everyone my norcal bretheren?
I GOT MY LICENCE!!!
w00t w00t w00t
just let me know, n i’ll see if that date is free…
its seems that im free most saturdays. we canprobably use my hosue ,and yuri has a good idea about the dremel, just sketch the pattern smaller than usual to make space for errors. but your car first yuri@!
saturdays sound good to me. i’m gonna try and get some one pieces too so we can install everything at once ad hook up the sidemarkers to the one pieces like they are supposed to be, you won’t be the only using free slave labor, muuuuahahahahaha.
damn, you todd. i’m not letting you touch my car, you’d probably cut the hole on my door just for the hell of it and say that’s the JDM placement. hahaha.
jdm weight reduction
umm… and speed holes? :shrug:
so where we meetin up at? todd, you should make sure everyone knows they need to have good ebrakes to come to your house…
where we meetin up at? and what’s the plan?
should it be an open invite? or just to us peoples?
sat sounds GREAT! the drive isnt tho:(
am i the only one coming from sj?
u guys up for jdm spoiler install too?imm pick one up soon
as for the tools i can get the cordless drill, but i am sure everyone has one:)
~
yea, pick a saturday, and who says Benicia is fine, at my house, i have space for 2-3 cars to be worked on at the sametime, or is there another place? somewhere nuetral? i want to all get together and get down to buisness.
pic a saturday…
this saturday? 22nd, next saturday? 29th?
todd’s place is fine with me i know how to get there…
btw whos todd and where his place:)
thanks
this saturday is all good with me(22nd). Just let me know where/or directions. Also let me know what I can bring…if anything.
oh…and if any of you guys wanna help me rewire my foglights…that would be swell.
should this thread be in the club meet section? should I post it up there?..or is this a limited member meet?
let me find out if im free this saturday the 22nd and if so then im in. ill let you guys know.
todd = mathlabs (JDM whore)
his place = benicia (where you can get picked up by a trucker and do it all night)
muuuahahahahaha :shock:
hey paulo… if it’s a open meet… see if mike would make it too
donavin doesnt have a gen 2 anymore, but his friend rich does…
they’re from daly city…