# Swapping gsr hydro internals into ys1 ls case

**URL:** <https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003>\
**Category:** Hybrids & Advanced Aftermarket Engine Performance\
**Created:** [September 29, 2008, 4:14am UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003 "2008-09-29T04:14:52Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![gilcontr](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/g/6f9a4e/32.png) [@gilcontr](https://forum.g2ic.com/u/gilcontr)\
**Post date:** [September 29, 2008, 4:14am UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/1 "2008-09-29T04:14:52Z")

</div>

can i do this? also, can i swap syncros in between the two gearsets? the gsr has a grind between 1st and 2nd.

---

<div class="post-metadata">

**Author:** ![DAteggy](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/d/898d66/32.png) [@DAteggy](https://forum.g2ic.com/u/DAteggy)\
**Post date:** [September 29, 2008, 5:17am UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/2 "2008-09-29T05:17:40Z")

</div>

yes it will work as long it’s a ys1.Swaping syncros I dunno

---

<div class="post-metadata">

**Author:** ![gilcontr](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/g/6f9a4e/32.png) [@gilcontr](https://forum.g2ic.com/u/gilcontr)\
**Post date:** [October 1, 2008, 5:01am UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/3 "2008-10-01T05:01:50Z")

</div>

up

---

<div class="post-metadata">

**Author:** ![Squeezethis](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/s/82dd89/32.png) [@Squeezethis](https://forum.g2ic.com/u/Squeezethis)\
**Post date:** [October 1, 2008, 6:27am UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/4 "2008-10-01T06:27:46Z")

</div>

should work… how much is the 1st-2nd syncho anyways? i doubt its very expensive considering they are made of brass n stuff.

---

<div class="post-metadata">

**Author:** ![Colin](https://forum.g2ic.com/user_avatar/forum.g2ic.com/colin/32/16_2.png) [@Colin](https://forum.g2ic.com/u/Colin)\
**Post date:** [October 1, 2008, 8:41am UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/5 "2008-10-01T08:41:51Z")

</div>

don’t buy syncrhos, you need the entire gearset to do the job properly…

---

<div class="post-metadata">

**Author:** ![gilcontr](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/g/6f9a4e/32.png) [@gilcontr](https://forum.g2ic.com/u/gilcontr)\
**Post date:** [October 1, 2008, 1:19pm UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/6 "2008-10-01T13:19:59Z")

</div>

what do you mean, colin?

---

<div class="post-metadata">

**Author:** ![Colin](https://forum.g2ic.com/user_avatar/forum.g2ic.com/colin/32/16_2.png) [@Colin](https://forum.g2ic.com/u/Colin)\
**Post date:** [October 1, 2008, 4:56pm UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/7 "2008-10-01T16:56:36Z")

</div>

You don’t want to just replace the “synchro” you want to replace the entire gearset.

For example, the third gearset includes 7 different parts:

![](http://www.acuraautomotiveparts.org/acura/jsp/mws/catimgs/13sk70_m0401.gif)

# 4 in this photo

In fact Honda doesn’t even sell the synchros separately, you have to buy the entire gearset.

Oh, and I’ll try to give you a call this evening after work, I should be available this evening so we can meetup and get you those parts…

---

<div class="post-metadata">

**Author:** ![gilcontr](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/g/6f9a4e/32.png) [@gilcontr](https://forum.g2ic.com/u/gilcontr)\
**Post date:** [October 1, 2008, 5:27pm UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/8 "2008-10-01T17:27:46Z")

</div>

i see… so no go on the hydro internals since i would have to get a new gearset anyway. damn.

i’ll be waiting for your call!

---

<div class="post-metadata">

**Author:** ![Colin](https://forum.g2ic.com/user_avatar/forum.g2ic.com/colin/32/16_2.png) [@Colin](https://forum.g2ic.com/u/Colin)\
**Post date:** [October 1, 2008, 5:34pm UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/9 "2008-10-01T17:34:51Z")

</div>

The synchros might be the same, and would work as a quick fix. But the correct way to solve the problem is to change the whole gearset.

Unfortunately I don’t know the nitty gritty of all this trans stuff, just the basics. I let my tranny guy do all the little stuff.

Don’t be afraid to tear the two transmissions apart and see if certain parts are different - its fun!

---

<div class="post-metadata">

**Author:** ![gilcontr](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/g/6f9a4e/32.png) [@gilcontr](https://forum.g2ic.com/u/gilcontr)\
**Post date:** [October 1, 2008, 5:57pm UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/10 "2008-10-01T17:57:11Z")

</div>

i’m never scurrD! i would totally do it if i had both trannies in front of me. i just don’t want to end up wasting money on a futile errand. i would need to get a hold of an extra ys1. the guy selling me the hydro gsr tranny is letting it go for 200. grinds at high rpm’s he says

---

<div class="post-metadata">

**Author:** ![Colin](https://forum.g2ic.com/user_avatar/forum.g2ic.com/colin/32/16_2.png) [@Colin](https://forum.g2ic.com/u/Colin)\
**Post date:** [October 2, 2008, 12:53am UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/11 "2008-10-02T00:53:47Z")

</div>

I’ve got a friend selling an LS YS1 if that helps at all… although I’m pretty sure you’re looking for a GSR YS1.

---

<div class="post-metadata">

**Author:** ![gilcontr](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/g/6f9a4e/32.png) [@gilcontr](https://forum.g2ic.com/u/gilcontr)\
**Post date:** [October 2, 2008, 12:56am UTC](https://forum.g2ic.com/t/swapping-gsr-hydro-internals-into-ys1-ls-case/84003/12 "2008-10-02T00:56:51Z")

</div>

well, an ls ys1 to disembowel in order to throw the hydro gears on.
