# where to run obd1 harness

**URL:** <https://forum.g2ic.com/t/where-to-run-obd1-harness/95296>\
**Category:** Electrical & Entertainment Systems\
**Created:** [February 24, 2012, 10:11pm UTC](https://forum.g2ic.com/t/where-to-run-obd1-harness/95296 "2012-02-24T22:11:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![La0b0iandy](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/l/e5b9ba/32.png) [@La0b0iandy](https://forum.g2ic.com/u/La0b0iandy)\
**Post date:** [February 24, 2012, 10:11pm UTC](https://forum.g2ic.com/t/where-to-run-obd1-harness/95296/1 "2012-02-24T22:11:00Z")

</div>

i’m doing a b18c1 swap into my 90 integra and not sure where i’m supposed to run the wires. only place i can think of is the firewall but it looks like i’m going to have to take my dash out to run it that way. is there an easier way to do this?

---

<div class="post-metadata">

**Author:** ![unified112](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/u/41988e/32.png) [@unified112](https://forum.g2ic.com/u/unified112)\
**Post date:** [February 24, 2012, 10:28pm UTC](https://forum.g2ic.com/t/where-to-run-obd1-harness/95296/2 "2012-02-24T22:28:59Z")

</div>

Are you talking about the main engine harness? Or a vtec sub-harness?

---

<div class="post-metadata">

**Author:** ![La0b0iandy](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/l/e5b9ba/32.png) [@La0b0iandy](https://forum.g2ic.com/u/La0b0iandy)\
**Post date:** [February 25, 2012, 12:54am UTC](https://forum.g2ic.com/t/where-to-run-obd1-harness/95296/3 "2012-02-25T00:54:17Z")

</div>

the vtec sub harness