# wire tuck   HELP!!!

**URL:** <https://forum.g2ic.com/t/wire-tuck-help/86348>\
**Category:** Electrical & Entertainment Systems\
**Created:** [April 10, 2009, 8:57pm UTC](https://forum.g2ic.com/t/wire-tuck-help/86348 "2009-04-10T20:57:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![sleeper91](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/s/b9bd4f/32.png) [@sleeper91](https://forum.g2ic.com/u/sleeper91)\
**Post date:** [April 10, 2009, 8:57pm UTC](https://forum.g2ic.com/t/wire-tuck-help/86348/1 "2009-04-10T20:57:29Z")

</div>

ok so I am doing my wire tuck an I forgot to label a connector. I am pretty sure it goes somewhere towrds the back of the motor. Its for a 92 gsr. Its a 4 wire an the colors are.  
Green/White  
Yellow/Black  
Orange/Black  
White (with a black thicker shielding)

---

<div class="post-metadata">

**Author:** ![b16da9](https://forum.g2ic.com/user_avatar/forum.g2ic.com/b16da9/32/80_2.png) [@b16da9](https://forum.g2ic.com/u/b16da9)\
**Post date:** [April 11, 2009, 2:19pm UTC](https://forum.g2ic.com/t/wire-tuck-help/86348/2 "2009-04-11T14:19:38Z")

</div>

Sounds like the O2 sensor plug but I would need a picture to verify.

---

<div class="post-metadata">

**Author:** ![fcm](https://forum.g2ic.com/letter_avatar_proxy/v4/letter/f/ac8455/32.png) [@fcm](https://forum.g2ic.com/u/fcm)\
**Post date:** [April 11, 2009, 2:37pm UTC](https://forum.g2ic.com/t/wire-tuck-help/86348/3 "2009-04-11T14:37:54Z")

</div>

Heated oxygen sensor, it is the only sensor with 4 leads, and they are the correct colors. 94