# YS1 tranny drain and fill

**URL:** <https://forum.g2ic.com/t/ys1-tranny-drain-and-fill/38798>\
**Category:** Stock Engine-Bay Components\
**Created:** [June 3, 2003, 12:41am UTC](https://forum.g2ic.com/t/ys1-tranny-drain-and-fill/38798 "2003-06-03T00:41:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://forum.g2ic.com/user_avatar/forum.g2ic.com/system/32/1_2.png) [@system](https://forum.g2ic.com/u/system)\
**Post date:** [June 3, 2003, 12:41am UTC](https://forum.g2ic.com/t/ys1-tranny-drain-and-fill/38798/1 "2003-06-03T00:41:09Z")

</div>

Does any one have a diagram of a ys1 tranny…i need to change my tranny oil cause im grinding 2nd 3rd and 4th…i need a diagram on where the drain plug is and the entry is at…thanks yall…

---

<div class="post-metadata">

**Author:** ![Colin](https://forum.g2ic.com/user_avatar/forum.g2ic.com/colin/32/16_2.png) [@Colin](https://forum.g2ic.com/u/Colin)\
**Post date:** [June 3, 2003, 1:25am UTC](https://forum.g2ic.com/t/ys1-tranny-drain-and-fill/38798/2 "2003-06-03T01:25:32Z")

</div>

you should download the helms manual (do a search) or at least go buy a Haynes at your local autoparts store. That way you can answer this question as well as a lot of others in the future.

oh, and don’t expect the grinding to go away when you change the fluid. It may help a little…but typically if your tranny is grinding you have a mechanical problem (i.e. bad synchros) and not just lack of or old fluid.
