hey all in g2ic world!!! i’ve got a 93 ls 1.8l that i took out a loooooong time ago. i can’t figure out how the engine harness is routed. i even took off the brackets (to paint them) and can’t figure them out either. it seems there are three “leggs” to the harness. it origiates from the pass side and one leg stays on the back side of the head. one leg goes for the injectors over to a “bulkhead” on driver firewall. the third leg goes under the intake to the alternator. i just don’t know how it all runs on the pass side (on top of my ys1 trans) so they can “safely” and securely get to their destinations. please post me pics or drawings or whatever. THANK YOU!!!
gimme your e-mail address and i’ll e-mail u the factory honda/acura pdf file for this.