CA: FS: OEM USDM and JDM DA items, Mugen, Comptech, More - clearing out all my parts

Ok I need to clear room in my garage, make reasonable offers and the items are yours. Shipping will be available thru USPS or UPS, packages go out twice a week. Pickup is available in Northern California. Please PM or email for fastest response, thanks.

THREAD WILL BE UPDATED WEEKLY WITH NEW PARTS!!

Engine:

  1. 94’ GSR Cylinder Head - Missing a few bolts but can be bought, otherwise complete with valvetrain intact, cams, cam caps, rails, IM, TB, willl also include stock obd1 injectors and used ITR valve cover for $300 obo

  2. Stock GSR cams with cam gears still attached - $75 obo

  3. Stock GSR Intake manifold with throttle body $100 obo

  4. Used JDM ITR valve cover - has a small hairline crack near the lower left corner, daily drove with this and never had a problem. very easily repairable if you are going to redo the valve cover anyway. $50
    Picture: http://i777.photobucket.com/al…8.jpg
    Hairline Crack: http://i777.photobucket.com/al…9.jpg

  5. Mishimoto Aluminim Radiator - MMRAD-INT-94 - Brand New in Box - $200

  • Will fit all 94-01 Integras, Full Size, Dual Core
  1. DC Sports Direct Air Charger “DAC” Short Ram Intake - Used - Was for 96-98 Civic but modified to fit 92-95 Civic but will fit 94-01 LS/ITR and GSR Integras (with Skunk/Blox/Edelbrock Intake manifolds) and B series Swapped cars - Discontinued, original DC Sports Quality before it turned to shiz - $30 picked up/$40 Shipped
    Picture: http://i777.photobucket.com/al…5.jpg

  2. DC Sports 2000-2001 GSR Stainless Steel 4-1 Header - Brand New in Box - SOLD

  1. Comptech Red Anodized Spark Plug Wire Cover - Discontinued and can’t be found easily - For B Series VTEC only - $90 picked up/$100 Shipped obo

  2. DC Sports Billet Aluminum Battery Tie Down for EG/EK/DC - Brand New, Sealed - $40 Shipped obo
    http://i777.photobucket.com/al…5.jpg

  3. JG/Edelbrock Pro-Flo “Big Tube” CARB Legal B series ceramic coated 2 piece header will also include Brand New optional Race Dumptube Pipe for open header application - $300 or $350 with dumptube obo

  4. Comptech Axleback Brand New for 06-up Civic SI - will need to use your own midpipe and use a Comptech flange on that or use two new flanges to bolt on - $250 obo

  5. Comptech 94-01 Integra GSR Test Pipe - Discontinued - $150 FIRM

  1. Exedy Stage 1 Organic Full Face Clutch - Brand New - $250 Shipped OBO
  • Part Number #08800B
  • Brand New and Unused, complete with Clutch Disc, Pressure Plate, Throwout Bearing, Pilot Bearing and Alignment Tool. Will include 2 Exedy stickers as well
    Picture: http://i777.photobucket.com/al…2.jpg
  1. JDM DA6 Underhood Fusebox Cover - $60 OBO

Suspension

  1. SPC Rear Lower Control Arms for EG and DC - Red Anodized - Part Number 69200R - brand new in box - One of the original lower control arms produced for EG/DC way before the other crap out there. Cheapest price online is $180, asking $150 Shipped OBO.
    Box Picture: http://i777.photobucket.com/al…9.jpg
    LCA Picture: http://i777.photobucket.com/al…0.jpg

  2. Discontinued Edelbrock 3 Point Front Strut Bar - original black with all hardware, brackets and instructions - brand new - $250 obo

  3. Spoon Sports Front and Rear Strut Bars for EG/EK/DC - used but in good condition - $250 Picked up/$280 Shipped for both or $120 picked up obo/$145 Shipped obo each
    Picture: http://i777.photobucket.com/al…4.jpg

  4. Cusco Type ST Front Strut Bar for EG/EK/DC - used but in good condition - $90 Picked up obo/$105 Shipped obo
    http://i777.photobucket.com/al…9.jpg

  5. Cusco Type OS Matching Front and Rear Strut Bars for EG/EK/DC - used but in good condition - $120 Each Picked up/$145 Each Shipped or Both for $220 picked up/$245 Shipped OBO
    Front Bar Picture: http://i777.photobucket.com/al…2.jpg

  6. Old School, Discontinued Z-Speed (Precursor to Skunkworks and Skunk2) Matching Front and Rear Strut Bars for EG/EK/DC - used but in good condition - $100 Each Picked up/$125 Each Shipped or Both for $180 picked up/$220 Shipped OBO
    Picture: http://i777.photobucket.com/al…2.jpg

  7. Discontinued Greddy Front Strut Bar for EG/DC/EK - used but in good condition - $85 Picked Up/$100 Shipped

  8. RCrew Rear Subframe Brace for EG/DC - BRAND NEW - only 1 Black and 2 Bronze Anodized left - $150 Each Picked up/$170 Each Shipped
    Picture: http://i777.photobucket.com/al…1.jpg

  9. RCrew Rear Subframe Brace for EK - BRAND NEW - only Black, Gold, Bronze or Clear Anodized left - $150 Each Picked up/$170 Each Shipped

  10. RCrew 12x1.5 Extended Lugnuts - Red Anodized - $120 for 16 pieces or $150 for 20 pieces

  11. Comptech Rear Lower Tie Bar - Fits EG/DC - Original Silver - $190 plus shipping

  • OG bar
  1. Skunk2 Rear Camber Kit - slightly used in excellent condition with original box - $175 Shipped obo

  2. Comptech Front Sway Bar for NSX - $100 or make offer

  3. Old School V-Spec Adjustable coilover sleeves for EG/DC/EK - $100 firm

Brakes:

  1. Complete rear USDM EP3 4x100 Rear setup for sale. This is the complete rear knuckle, disc brake, caliper, e brake cables everything off a usdm ep3 si. Everything is still assembled. This is for people who want to do the rear oem Big Disc Conversion for EG/EK/DA/DC with the EP3 disc and calipers. Asking $200 or best offer for the whole setup picked up or if you want just the calipers and rotors and pads, $150.

Wheels:

  1. Rays Red 35mm 12x1.5 Lugnuts with Locks and Key - Open Box Returned item but inspected and is Brand New still - $110 picked up/$115 Shipped

  2. 15" JDM CTR Wheels/USDM ITR Wheels - Champ White with no center caps. Has wear on the faces and one small curb on one of them. 3 Matching Fuzion ZRi tires in which 2 have 85% tread and the other needs to be replaced. The 4th tire is a VSP tire with 80% tread. These were daily wheels with wear. $350 FIRM

  3. OEM JDM ITR Champ White “H” Center Caps - worn caps with some fading - $70 obo, buy with the wheels for $400 total.

  4. Old School Racing Hart Type C Tracers - $900 Shipped or Best Offer

  • 16x7
  • 4x100 and 5x100
  • +38 Offset
  • Complete with all caps. dishes and rings
  • Fairly good condition for 15+ year old rims, minor paint chips here and there, lips could use repolish but are still fairly shiny.
  • No tires
  • All Lip Decals and Screenprinted Spoke Logos are intact, original and untouched
  • Will include a fresh set of reproduction lip decals to new buyer
  1. Pair of Volk TE37 White Wheels - 15x7 +43 4x100 - Wheel 1 has a small crack on the rear outer lip, 100% fixable, was quoted $70-100 by local wheel shops to fix. Wheel 2 has a small bend on the front outer lip but 100% repairable, was quoted $70-100 by local wheel shops to fix. These were daily wheels, stickers starting to peel, scratches, etc. perfect for refinishing or cheap track wheels - Asking $200 per wheel or $400 for both.

  2. Single Mugen RNR - 15x6.5 +45 4x100 Original Black with Red Lip - Has a nasty 3" curb that is 100% repairable. No center cap. Asking $175 OBO

  3. Single Mugen RNR - 15x6.5 +45 4x100 Refinished in White - Has a hairline crack starting to form on one of the spokes that is 100% repairable. No center cap. Asking $150 OBO
    Picture: http://i777.photobucket.com/al…6.jpg

  4. Falken Tire Displays - 2 sets of 4 pieces each available - $40 each set

Interior:

  1. OEM JDM Honda Access DC2 SIR-G Integra Front Floor Mat Set #1 - $50 Shipped obo
    Picture: http://i777.photobucket.com/al…3.jpg
    Picture: http://i777.photobucket.com/al…4.jpg

  2. OEM JDM Honda Access DC2 SIR-G Integra Front Floor Mat Set #2 - $50 Shipped obo
    Picture: http://i777.photobucket.com/al…5.jpg
    Picture: http://i777.photobucket.com/al…6.jpg

  3. JDM DA6 Front Door Panels - no tears or rips, clean - $175 or best offer

  4. JDM DA6 Rear Interior Panels - no tears or rips, clean - $175 or best offer

  5. OEM Honda Access JDM DA6 5 Piece Floor Mat Set - SUPER DUPER RARE IN THIS GOOD OF CONDITION - $250 shipped or best offer

  1. JDM ITR Shift Knob - $50 Shipped

  2. JDM ITR Armrest Delete - $50 obo
    http://i777.photobucket.com/al…2.jpg

  3. JDM OEM Honda Flare and Flare Bracket - $26 shipped - Brand New, Unused and Bracket is still new in OEM Honda Packaging

47: JDM/USDM DA Cluster - Real JDM Custer with USDM Tach for those who are still using their LS motors - $80
http://i777.photobucket.com/al…3.jpg

48: JDM Manual Seat Belt Conversion for 90-93 DA Hatch - SOLD

  1. JDM OEM Gathers Rear Speaker Covers for 90-93 DA Hatch - $200 obo

50: OEM USDM Rear Speaker Delete Cups - $110 obo

  • I don’t believe you can find these new anymore but if I am wrong I will adjust the price accordingly.
  • Excellent condition, perfect when doing the Miracle X bar setup with the side butterfly bars
    http://i777.photobucket.com/al…2.jpg
  1. JDM OEM RHD Audio Console with Personal Non-Smoking Box- $225 FIRM

Exterior:

52… Circuit Hero 1st Gen Tow Hooks - Front and Rear Extensions with hardware - original brushed stainless finish - $140 Shipped obo
Picture: http://i777.photobucket.com/al…0.jpg

  1. REAL JDM Vision EG6 Smoked Amber Passenger Corner Light - damaged, has a chip that was filled with epoxy - turn this into a jdm intake scoop of some sort - $50 Shipped

  2. JDM H4H Bi-Xenon HID Headlight Kit - fairly hard to find, brand new, fits JDM Honda EF, DA, EG, etc headlights, plug and play - $125 shipped

  • I only have one of each color leftover from a groupbuy 5000k, 6000k, 8000k, 10,000k
  1. One of each of the followin left:
    9006 5000k HID Plug and Play Kit, brand new in box
    9006 6000k HID Plug and Play Kit, brand new in box
    H4 5000k HID Plug and Play Kit, brand new in box
    H4 6000k HID Plug and Play Kit, brand new in box
    H4 8000k HID Plug and Play Kit, brand new in box
  • Buy one for $60, two for $110, three for 150, etc…
  1. JDM Parking Permit/Registration Decal - $20 shipped
    Picture: http://i777.photobucket.com/al…7.jpg

  2. DC2 and DA6 Vin Tags - $25 shipped each obo

  3. JDM DA6 Bronze Tinted Front Door Glass and Rear Side Window Glass - $250 obo

  • 4 piece set, super rare to get in good condition.
  1. OEM Stanley 92-93 DA Front Bumper Lenses - Excellent condition - SOLD
  • I bought these brand new from the dealer and used them for less than half year.
  • Absolutely crystal clear with no pitting, cracks, chips at all. Only a few minor scratches that are easily buffed out.
  1. OEM Brand New in Box Stock 92-93 DA Integra Front Lip - Best Offer
    Part Number: 71110-SK7-010

  2. OEM Brand New in Box Front Plastic Windshield Cowel for 90-93 DA Integras- SOLD

Audio

  1. Custom Fiberglass Subwoofer Box for DC Integra Hatchbacks, fits right in the left corner for 10" subwoofers. May fit DA. $50
    Picture: http://i777.photobucket.com/al…4.jpg

Misc

  1. OEM Toyota Lugnuts - fits a bunch of models - $10
    Picture: http://i777.photobucket.com/al…0.jpg

  2. Mugen EK9 Catalog

  3. Mugen EK Ferio Catalog

  4. Hyper Rev S2000 Book

intrested in the oem bnib windsheild cowl as well as oem bnib front lip.your best price shipped to 98499?
206 617 5921 shoot a text if u want.thanks man
pp ready

If Captinda9 does not get the cowl let me know a price on it an the rear sub box do you know the inside cubic feet of it?

here my email greazemunkey73@yahoo.com

Pictures of BNIB windshield cowel to wam1004@gmail.com, plzz and thank you

i’m interested in your EP3 calipers rotors and pads…

On the 94 gsr head…Sell me the cam holder. The very top left that connects with the distributor I think. It holds the intake camshaft with 2 10mm bolts. Mine is broke. Lmk.

Emailed on some parts… CAgudelo87@gmail.com

still waiting to hear back about cowl and the lip.
ebman402@gmail.com thanks

Pic of the black and red Mugen RNR please?

[QUOTE=captainda9;2252520]intrested in the oem bnib windsheild cowl as well as oem bnib front lip.your best price shipped to 98499?
206 617 5921 shoot a text if u want.thanks man
pp ready[/QUOTE]

Text sent for oem lip, front cowl is sold already

The cowl is sold already. The rear sub box is about .7 cubic feet, it was for an Alpine Type R. I just edited the listing, it is for a DC Integra Hatch, but may also fit a DA.

Text sent, hope to meet up Thursday and have these go to a good home.

Sorry selling complete only.

Thank you sir for the purchase, parts will be shipped out this week.

I will grab the RNR from storage today and take a picture for you.

Thank you.

Bump for some great parts

thank you, bump

i would like the jdm da mates will the fit 91 u.s car or are they rhd only

They are JDM so made for RHD but will still work as floormats in your US car.

lookin at rhd console…hit me up 90923six 0three59…thnx

text sent

Interested in the 16 tracers. If u can text me or email pics
Viptint@gmail.com
909 821 two two two four

Can you quote me on the gsr head shipped to 77642, port Arthur Texas? Appreciate it