Okay, I know this may be the wrong forum but this also seems to be the place that gets the most traffic.
I am waiting for 10 sets of the bushings to be completed. I think this “may” be the last run I’ll do, so jump in if you think you will ever put an EF rack into your DA. They should be done by mid February. The price will be $50 per set which includes new hardware, custom shims, the aluminum bushings, and of course technical support if you have any install questions. I know it’s $5 more than the last batch, but it was more work than anticipated hence the added money. If you don’t want hardware I can knock $15 off the price. The price includes shipping to anywhere in the continental US. If you live outside the US, I only ask you pay actual shipping charges (however much that is).
I will give first dibs to people that posted on the other post, but you have to post here to confirm you still want a set so please do so.
Interested parties:
phatcardesignz + $50 Due
Tacvbo + w/ES bushings $62 Due
JDM1nt2B + w/ES bushings $62 Due
Solehead714 + $50 Due
dakine702 + $50 Due
DA oldskool - $50 Due
Ominous G2 + w/ES bushings $62 Due
PSYCHOTIC93R + w/ES bushings $62 Due
90da9teg + $50 Due
Schoolinu + $50 Due
Reserve List- next in line if any backouts or non-payment
Dago
rollinmyda
spyder_099
Nawaaz + w/ES bushings
tilegend
Eric
GEN2GSR
JayDM ls/vtec + w/ES bushings
nizzan4u2nv
tegguy
honduh
RustBucketDA
As of now all sets are spoken for unless I don’t get paid from people. I have all hardware in hand. A minus means you don’t want hardware and a plus means you want the full monty. I can even order DA Energy Suspension Poly Bushings and add that to the total if you want them *I recommend them. Added cost of the ES bushing kit is $12 and shipping is included. If you have any questions e-mail me at g2guru@comcast.net. Thanks and I look forward to providing some kits to the interested parties. Kits are ready to ship.
hey, i’m curious what a set includes as far as the bushings, i’ve never researched swapping so idk how many you actually need like is it 2 bushings 4 bushings etc, i’m just curious because you said this may be the last run you do, i have a full blown machine shop in my garage, lathe, bridge ports etc. this looks like it was done on a lathe then cut in half but thats just my assumption. might be a possibility i can make more if it seems theres a large need for them. email me widebody_civic (AT) hotmail dot com
It’s 6061 Aluminum turned down on the lathe and then cut in half. The other part supplied is a custom washer to shim the rear side of the rack so it sits at the correct angle without binding. I can supply you with .pdf drawings if you would like.
[QUOTE=Nawaaz;2113549]Can you put me up for a complete set please… along with ES bushings
Thanks!
Nawaaz Khan[/QUOTE]
I’ll put you on the reserve list as all 10 have been spoken for (many people asked to be included in this batch on my other thread last year so they got first dibs). But I need confirmation from all of them by the end of the week. If the anyone one drops off the initial 10, you’ll be first in line to receive a set. Just 10 set for this round.
yeah i mean shoot me any info you got on it and i’ll check out what i can do on it maybe keep it going since it does seem like alot of people want them.
