I need the wiring diagram for the headlights, front corner turn signals, and the front bumper signals.
The dumass of a previous owner snipped my wiring harness and botched up his own. Just trying to fix it.
The front left turn signal works peachy, but when I turn the right turn signal on, the front left one blinks too.
I just need the diagram to attempt to remedy this issue
Thanks all
LF turn signal - green/blue
LF side marker - green/white
LF high beam - red/green
LF low beam - red/yellow
RF turn signal - green/yellow
RF side marker - green/red
RF high beam - red/blue
RF low beam - red/white
Black is grounds for all of them. 94
alright, thats perfect
appreciate it man
okay, what you said doesn’t match up to what i have…
just to clarify, i have a 2dr 91 rs da integra
i have the headlights, high and low, and the fogs on either side hooked up peachy
here are the colors for the unknown wires i have:
on the right i have:
green/red
red/black
black w/ 2 silver stripes
black w/ 2 silver stripes
green/white/one silver stripe
black w/ one stripe
on the left i have:
red/black/two silver stripes
green/white/one silver stripe
black w/ 2 silver stripes
black w/ 2 silver stripes
green/blue/one silver stripe
black w/ one silver stripe
Don’t know what to tell you, the wire colors are out of my Haynes manual, I did forget left and right park lights, [red/black on both sides].
All I can suggest is for you to test each lead one by one using a 12V test light. 94