It’s been awhile since I created a f/s thread. Here’s the story, I caught the drift bug and got myself a 240sx and basically concentrated on that rather than the DA. Well now that I’m content with the status of my drift car, my DA has got my full attention, and it’s time to get it road worthy again. All the parts I have, I no longer need/want them and they are up for grabs. If my itrader feedback is not good enough for your expectations, here’s a couple more reviews about me from different various forums that I’m part of:
Anyways to more important details, all items are located in Central New Jersey (New Brunswick/Rutgers area to be specific). [SIZE=4]All items are priced WITHOUT shipping and paypal fees unless stated otherwise.[/SIZE] I would also like to add that, if my prices are a bit off, please contact me rather than bash my thread about; I can work with you as long as you show me the respect and courtesy. My contact information jkao234 at gmail dot com. Honest selling is my business and I would like to keep it that way.
[SIZE=3]PLEASE BUMP IF VIEWED!![/SIZE]
SPC front adjustable ball joint P/N:67330
-Adjustment range: Camber +1.50 degree to +3.00 degree
-Brand New (don’t have the box)
-Does not include the bolt and cotter pin!
-Only difference between this version and the latest is the boot
-Retails for approximately $150+
-Price: SOLD!!! to smit7277
-Shipping: Yes, but buyer must cover shipping fees.
AEM B-Series Fuel Rail & Fuel Regulator
-Good Shape (Just dirty and cosmetic issues)
-Does NOT Include Injectors
-Will NOT separate the combo, so don’t bother asking!
-Price: SOLD!!! to DB1_tegra
-Shipping: Yes, but buyer must cover shipping fees.
First Generation B16A (OBDO) Intake Manifold
-Good Condition
-Will NOT come with IACV or TPS sensor, but will come with Throttle Body!
-Price: FREE, Just pay for shipping!
-Shipping: Yes, but buyer must cover shipping fees.
[SIZE=3]NOTE: The AEM fuel rail & reg. has been sold!!![/SIZE]
[SIZE=3]NOTE: The AEM fuel rail & reg. has been sold!!![/SIZE]
Pics:
First Generation B16A (OBDO) Distributor
-Good Condition
-Ignitor was replaced before
-Comes with used Bosch spark plug wires
-Price: SOLD!!! to wingbox
-Shipping: Yes, but buyer must cover shipping fees.
OBDO Alternator
-Used, but still works
-Price: $20 SHIPPED or Best Offer!
-Shipping: Yes, but buyer must cover shipping fees.
Pics:
First Generation B16A ECU (OBDO)
-Still works, just laying there and collecting dust.
-Price: $60 SHIPPED or Best Offer!
-Shipping: Yes, but buyer must cover shipping fees.
Pics:
AEM Ram Air Intake
-Great Shape
-Has some blemishes and some grease on it, nothing major
-Has CARB sticker for you Cali guys!
-Comes with no-name filter and breather filter
-Price: $120 SHIPPED or Best Offer!
-Shipping: Yes, but buyer must cover shipping fees.
Integra Type- R (ITR) Intake Manifold
-Comes as you see it in the pics
-Does NOT have IACV or TPS sensor on it; that’s how I bought it!
-Does come with BNIB rear support brace (value at $67 from Honda)
-Price: SOLD!!! to rollinmyda
-Shipping: Yes, but buyer must cover shipping fees.
ITR/CTR Shifter
-Price: SOLD!!! to theneedmachine on H-T
-Shipping: Yes, but buyer must cover shipping fees.
Skunk2 10th Anniversary Weighted Shift Knob
-Good Condition, little signs of some rust (very minor)
-Nice feel and IMO, the only thing nice about junk2
-Price: SOLD!!! to racereaper7 on H-T
-Shipping: Yes, but buyer must cover shipping fees.
Pics:
GSR (Fat Five/Hammers) Rims
-Spray Painted Green from my High School Days
-Only one wheel rash some curb rash on a spoke
-Besides the paint, it is a very clean set
-Will NOT include the tires
-Price: SOLD Locally!!!
-Shipping: LOCAL PICK UP ONLY!
Moroso Sealed Battery Box
-P/N: 74050
-Used this in my brother’s old integra
-Good condition
-Only issue is there are some tabs missing for the lid, as seen in the pictures.
-Can take the exact measurements if needed, but for the most part it fits most car batteries
-Price: SOLD!!! to JBotch79 on Zilvia
-Shipping: Yes, but buyer must cover shipping fees.
Generic Strap Battery Box
-Came with my 240sx
-Has holes drilled on the bottom
-Comes as you see it in the pictures below
-Price: DONATED!!! to Nick_SX on Ziliva
-Shipping: Yes, but buyer must cover shipping fees.
Toda Heavy Duty Oil Pump Gear for B-Series (Vtec)
-Brand Spanking New
-Was going to use this on my poor man’s type-r build, but I’m abandoning it as you can see below
-Application is for B16A and B18C (Type- R) - 84mm
-Price: SOLD!!! to Crxrida on H-T
-Shipping: Yes, but buyer must cover shipping fees.
First Generation B16A (PR3/OBDO) Cylinder Head
-Was running with no issues, before pulled
-Will not come with valve cover, distributor and vtec solenoid.
-Price: SOLD!!! to Jules Winnfield on H-T
-Shipping: LOCAL PICK UP ONLY!
94-95 OBD1 GSR B18C1 Shortblock (Disassembled)
-Motor had approximately ~40K, before it was pulled from junkyard (do not have receipt though)
-Has all matching mains
-Disassembled
-Cylinder Walls very clean, no deep scratches and etc.
-Maybe missing some sensors, but majority is still there
-Price:SOLD!!! to Jules Winnfield on H-T
-Shipping: LOCAL PICK UP ONLY!
Blox Lug Nut “Key”
-Brand New
-Price: SOLD!!! to shook wun
-Shipping: Yes, but buyer must cover shipping fees.
JHPUSA I HEART JDM keychain
-Brand New (though box is messed up, but package never opened)
-Price: $15
-Shipping: Yes, but buyer must cover shipping fees.
Pics:
[SIZE=5]Again, all items are priced WITHOUT shipping and paypal fees unless stated otherwise!!
[/SIZE]
Again feel free to ask any questions or comments, and if there is any conflict in my prices, I’m a reasonable guy, so I can probably work with you if you don’t low ball too low lol. You can contact me here or via email at jkao234 at gmail dot com
[SIZE=3] PLEASE BUMP IF VIEWED
[/SIZE]
Thanks for looking!!
I’ll do $46 shipped, and it is in working order. Please email me at jkao234 at gmail dot com for paypal information if you’re stil interested. Thanks for the interest!
Thank god you’re in NJ, I’m interested in a couple things. Hopefully you still have it by the time I’m able to get it. The b16a head, and just cause I need to replace my stock, I want the shifter and skunk2 shift knob lol.
