So today, when I opened the hatch, the rear visor decided to snap on me. I have had this visor on for the past 3 years and this is the first time I’ve ever seen anything like this. Any ideas on how I should approach this? I could attempt fixing it by epoxying the pieces together, but it might not look the best. Here’s a picture of the damage.
Much appreciated.
I would exopy it. Sand it smooth and paint it.
Epoxy is The best bet bro
The same break happened to Dustin (Teg Youngin) and he repaired his with some glue and then wet sanded the crack to keep it smooth. It’s in his build thread, about halfway down:
http://forums.g2ic.com/showthread.php?209321-My-jasper-build-thread-G2TEG-2!/page33
Thanks for the advice guys. I just epoxied it so I’m just waiting for it to cure and I’ll be wet sanding it down!
It looks like the oem rear visor has a tendency to snap in the middle brackets.
[QUOTE=Cillu;2312283]Thanks for the advice guys. I just epoxied it so I’m just waiting for it to cure and I’ll be wet sanding it down!
It looks like the oem rear visor has a tendency to snap in the middle brackets.[/QUOTE]
pics of what you used and outcome! 