FS: Ohio, Columbus
24 Hour Part Out -Get it before it’s scrap!
[HR][/HR]
[SIZE=3]EDIT: Car is now scrapped, but have some parts remaining!! [see bottom of post for details] [/SIZE] (10/17/2013)
[HR][/HR]
[SIZE=4]EDIT: Clearing up confusion,[/SIZE] [SIZE=5]goto “EDIT: (CURRENT INFO)” for what’s left [/SIZE] (10/30/2013)
the car was scrapped but I still have what is listed after the “EDIT: (CURRENT INFO)” division line
[SIZE=3]JDM B18C Motor (‘complete swap’ / longblock with accessories) still available, will ship! $1800[/SIZE]
[HR][/HR]
1992 GS w/ JDM B18C, 5-Speed (YS1), otherwise mostly stock.
Black exterior, Tan interior.
– Chassis and YS1 transmission have 200k+ miles
[INDENT](I think mice destroyed my wiring, has odd electrical issues)[/INDENT]
– Motor has less than 50k, nothing wrong with it.
[INDENT]has import papers, can prove millage.
[/INDENT]
JDM B18C (setup as OBD1), w/ Skunk2 Intake manifold
$1800 OBO[INDENT][INDENT]motor for sale as configured, motor is too young to part out.[/INDENT][/INDENT]
I’m scrapping this Teg, as soon as the motor is pulled.
If you want/need a part, let me know ASAP so I can save it for you.
What’s available: anything, many things x2
[INDENT][/INDENT](I’ve many a collected parts)
Images for reference:
JDM B18C w/ Skunk2 Intake Manifold
– less than 500 miles since imported. Nothing wrong.
(my air compressor blew off some of the valve cover paint, it’s not old)
A/C system (missing one line, condenser still on car)
Misc extra parts, small interior stuff (buttons, etc.), headlights and taillights, + more.
I’ll be pulling the motor later today or tomorrow at the latest.
If you want the motor, let me know before I pull it!!
You can have the whole car… :rockon:
– Car runs and is drive-able.
Summary:
JDM B18C (setup as OBD1), w/ Skunk2 Intake manifold – $1800 OBO
[INDENT]motor for sale as configured with or without transmission[/INDENT]
If you want parts let me know asap,
[INDENT]motor should be pulled by Oct 3/4th at the latest.
[/INDENT]-- I’ll pull/save requested parts, just make an offer.
-OR- entire car free w/ purchase of motor.
[HR][/HR]
[SIZE=4]EDIT: (CURRENT INFO) Car is now scrapped, but have some parts remaining!![/SIZE] (10/17/2013)
[HR][/HR]
Still have the individual items not originally on car mentioned above.
(everything that isn’t on the car)
including… but not necessarily limited to…
- [B]JDM B18C OBD1 motor w/ Skunk2/Blox Intake Manifold[/B], in excellent condition with no more than 50k miles. [B]$1800[/B] for the motor as currently configured and the transmission for free if you want it. -- See page 2 for documentation/proof of mileage, it's legit. [img]http://xjabbax.com/teg_part_out/CIMG0637_640.jpg[/img]
- Brand new (NIB, unopened) [B]OBD1 Vtec sub-harness -- $40 shipped paypal[/B]
to run VTEC in non-vtec car.
[INDENT]OBD1 Vtec sub-harness to run VTEC in non-vtec car. The sub-harness includes a knock sensor/vtec solenoid/vtec switch connector. And three obd1 ecu pins. Instructions are included you can also email if you get stuck. This harness is plug and play no modifications of your wires. All wires have been soldered and heatshrink. [/INDENT]
Note I believe I have this, it is in my purchase history, if not I have the Rywire one.
- [B]B-series VTEC Solenoid, USDM (has oil pressure switch) -- $85 shipped paypal[/B] Used in good working function condition, [img]http://xjabbax.com/teg_part_out/vtec_solenoid.jpg[/img]
- Acura Honda OEM IAT [B]Intake Air Temperature Sensor -- $15 shipped paypal[/B] New in box, unopened (not pictured)
- [B]2-prong Honda style sensor plugs w/ pigtail[/B] (for vtec solenoid, coolant temperature, & like 3 other sensors) -- $10 shipped paypal New in box, unopened Quantity available: 5 [img]http://xjabbax.com/teg_part_out/vtec_solenoid_plug.jpg[/img]
- Genuine [B]New[/B] OEM Honda Civic / Acura Integra [B]VTEC Solenoid Gasket [/B]-- $15 shipped paypal (not pictured)
- OEM Acura Integra GSR 1996 Special Edition wheels, (*NO SHIP* on this item, local pickup only) - tires have decent amount of tread - asking $250 (if that sounds too high or low someone let me know) [img]http://xjabbax.com/teg_part_out/CIMG0639_640.jpg[/img] [img]http://xjabbax.com/teg_part_out/CIMG0645_640.jpg[/img]
- NEW Cold air intake / CAI kit for g2 (or similar b-series) - Generic brand, oil cone filter, for g2 (has one crankcase and one vacuum port) - Cone filter is blue, pipe is stainless (not pictured)
[HR][/HR]
[B][I]END EDIT: - (10/17/2013)
[HR][/HR]
