hey fellow members, i recently got laid off and decide to try and make some extra cash to pay the bills and mortgage since michigan is a lost cause.
so what im doing if anyone is interested is re-doing any wiring harness you may have to look like a custom professional look. i take the whole wiring harness apart including all conncector ends and re-do the harness using expandable sleeving on the entire harness and using heat shrink on all ends before replacing the connectors which are degreased to look brand new.
this does take alot of time and have done this for locals but with extra time have extend to reach out to you members for extra work.
you would have to ship your harness and turn around is about a week as long as i have no other harness’s im workin on.
if you have any other question as far as price you can email me at josh@mattssi.com
creative way of finding a way to make some money:up:
if your still doing this in a couple of months. ill have an engine harness. whats the estimated cost.
Please get an OK from Neil before proceeding with this service.
Anyone offering any type of service needs to become a vendor.
thanks spikey will do.
and cost depends on roughly the length of the harness
i would estimate supplies and labor would be 75-125 for just the engine harness but i dont have it in front of me to measure the length, supplies include the sleeving, heat shrink and electrical tape in which all i use quality products not the cheap stuff
werd, good luck with the mods and ill keep this in mind
I will keep this in mind as well…for an engine harness…good stuff man
thanks guys, i appreciate the support. i will most likely be doing this for a while since im also in the middle of trying to move to arizona next year sinces there no work here.
i will post pics once installed on my car which will be a while but its a showcar which i why i did this to my entire cars harness. not the norm but worth it in my case