My car is a 91 Black integra. The rear end of the car was hit, and repainted / repaired by a shoddy body work place about 4 years ago. The car was bought and its lifetime has been between las vegas, nv and Orange county, CA. I want to prep the car as much as i can for paint, i have now have a garage to work on the car, but its in an apartment complex.
The paint in the rear is rusting underneath causing it to crack. Where do I start? How do i go about sanding this down? and do they make electrical Dual Action Sanders? i don’t have an air compressor.
This website would probably give you some information to start http://www.gmtips.com/3rd-degree/dox/tips/paint/dent/body-01.htm
Yes they make electric DA sanders a google search will bring up a few
looks like they just bondoed the car and painted over the bondo. With rust, just sand it all down to bare metal. With the bondoed spot…if it were me I would sand it all off and see about fixing the original damage.
Another Vegas cat. Whats up. I agree with blackknight. You gotta get down to the bare metal and sand off all the rust.
yeah most of the rust is just flash rust. I dont have an air compressor so im trying to figure out the best way to sand the rear of the car down.
What part of town you stay at?
southwest.
i’ve been having problems with my car lately. The clutch release bearing went out. And now my brake booster. Its going up to hondoctor’s tomorrow. This car’s been in my family forever fixing the bad job the last shop did is gonna be tricky.
well i’m on the north side. If you need help with anything, i’m always down. Let me know
