Here are a few pics my buddy shot for me the other day…enjoy!
nice wheel fitment, what are the specs?
^ Thanx!
A-Tech Final Speed Eraser’s 15"x7 +35 on 205/50/15 Yokohama S-Drive’s. Where in CFL do you stay?
outside of Gainesville, west side of the county of alachua, in the woods.
what about you?
^ gotcha…I stay in Casselberry which in just outside Orlando. No I know why I have never seen you at any of the local meets
i dont really go to any “meets” here aside from a weekly gumball style drive with a bunch of random cars.
the group i run with is more of the less socializing, more vehicular lunacy type.
we find housing developments that never got started and find a racetrack-like route and do timed runs on it, GPS timing, helmets, spotters, the whole nine yards. safey is important.
itll be a segment in the next DVD from IMV films (www.imvfilms.com). its the most fun ive had for free in a LONG time, if you dont count the taxes i pay for the road maintenance and the brakes/tires ive worn out 
if youre interested, you should come on one of our cruises.
^ thats fucking insane! 
i think its fucking awesome too bad they don’t have places like that up here we could do it not much expansion going on in my area lol
always clean :werd:
love the wheel fitment. it’s perfect IMO
What front lip is that?
Your car looks great man!
yeah, down here in FL, a lot of developers bought up a bunch of land right at the end of our housing bubble, paved roads for access and then the economy tanked. at least 15 different developments, that we know of, have been abandoned; totally uninhabited. we call them (insert something relevant) International Raceway. so like Hawks Ridge International Raceway because the name of the development was Hawks Ridge. its fun like nothing else.
thanks for the headsup on the fitment, its exactly the fitment i want.
Steve, you should bring this beauty to the BIIIIIG East Coast Meet in Richmond, VA on May 29th.
It would be nice to meet you in person 
Links discussing the meet:
http://www.clubintegra.com/board/showthread.php?t=46417
http://vadriven.com/forums/showthread.php?t=325805
http://honda-tech.com/showthread.php?t=2689033
http://www.facebook.com/pages/Richmond-VA/East-Coast-H0NDA-Meet/190742973957?ref=ts
Its almost as “mainstream” as the Eibach meet. Some have referred to it as “The East Coast ‘Eibach’ Meet” (even though it is in NO WAY AFFILIATED with Eibach or its subsidiaries)
Last year saw almost 1,000 cars. Honda Tuning coverage will be there. Builds from DD beaters, all the way up to $100,000+ RACE SPEC S2K’s and NSX’s. Check it out.
Its HUGE.
For the first time ever, I will be taking my DA down there. It will be done in time (my rebuild), so I’m hoping to get some Honda Tuning love. The story of my DA alone should get me some shouts, lol.
Man that sounds like something I would love to go to, but I dont think my car will be ready in time. Im about to pull her about and start poppin some vtec with a whole lot of other goodies! My goal with this car is a Honda Tuning spread so it would be pefect but, I just don’t think there is enough time!
That all sounds like a lot of fun, but i’m about 10yrs past my crazy stage! And about the fitment…IMHO, it’s the best fiytment for a DA!
It’s an ABS Type-R Replica front lip and thanks for the props!
lookin good as always:rockon:
Steve, come on! You must do it. Just do what I’m doing. Keep the hood closed, lol. I have the same goal of a HT spread. After all I’ve done this year with the rebuild, I’m an engine swap, wire tuck, bay shave away from it. A few interior upgrades, and mine will be creeping towards baller status, lol.
Doing my LS/VTEC next year, and when I do, the bay is getting shaved and tucked on a ridiculous level. Probably going to be having a cage installed soon, too. I’m hoping its done before the meet
Love it 
Thanx bro!
[QUOTE=imcnblu;2146018]Steve, come on! You must do it. Just do what I’m doing. Keep the hood closed, lol. I have the same goal of a HT spread. After all I’ve done this year with the rebuild, I’m an engine swap, wire tuck, bay shave away from it. A few interior upgrades, and mine will be creeping towards baller status, lol.
Doing my LS/VTEC next year, and when I do, the bay is getting shaved and tucked on a ridiculous level. Probably going to be having a cage installed soon, too. I’m hoping its done before the meet :)[/QUOTE]
Oh I don’t mind popping my hood…she is wire tucked already and looking good. It’s just that that is the week that I will be swapping the new motor in and all…The car just won’t be done by then! Not to mention it’s like a 16hr drive!
oh, that just sounds like excuses :giggle:
J/K, but you’re obligated to attend next year. By then, we might be able to run dual features, lol… Because my tucked/shaved bay should be done, and so should my LS/VTEC. I’m trying to get my roll cage job secured right now… 
nice car dude clean and simple:rockon:
Jake: hahahaha…it’ll be hard to roll to VA without a motor in the car! Next year it is…I’ll she will be boostin pretty hard by then! Motor is just about done, and I have to paint the wife DB1…then I will get the turbo install done…
custom 1 off manifold, down pipe & the whole 9!
Thanx for all the kind comment everyone!
-Steve