I’m looking to learn about the different swaps available for the G2.
If you guys have some site that cover the ups and downs of the swaps into the G2 Integra and the parts needed to do so.
Thanks In Advance Guys.
As a matter of fact…check the engine swap guide in the teg tips section if you haven’t already. It’s very complete on information for swaps but only covers swapping in vtec engines. HTH
I’ve read the Engine swap guide but I was looking for a little more in depth information.
like running new wires an stuff to a new ECU…
Yes like ECUs, one thing that Dan’s gudie didn’t have was what ECUs to use.
I’m considering doing the dreaded H22A and I don’t know what parts to use. Are there Any websites that cover this swap?
My swap guide does cover what ECU to use. However, I don’t cover which header/intake will fit and some other minor stuff.
The Swap guide is a B-series VTEC swap guide. That’s why the H22 and the B20 are not on there. I get that question a lot. If you want an H22 swap, I suggest you contact one of the members that has done it before. I believe there are a couple. Best of luck.
Sorry to shoot you down there Dan, your gudie does cover what ECU to use for that swap.
I am considering doing a poor man’s ITR instead of the H22A. I have e-mailed you a few times asking questions about it.
Who’s done the H22A swap?
check out the old ones
alot of good info…very detailed ls/vtec spread too!!
Sorry, I’ve been real busy lately. Hardly have time to access G2IC, and when I do it’s usually from work. And my work has blocked internet based e-mail to prevent virus intrusion, so I can no longer acces my G2guru@hotmail.com account from work. If you need to reach me during the day, e-mail me at daniel.platt@opbu.xerox.com . Unfortunately, I haven’t been online much at all at home.
I believe “Fastflip” has done the swap. And I thought there was another, but I don’t remember who. Here’s his e-mail…
Best of luck. If you need help with the poor man’s ITR setup, let me know.
Thanks a lot Dan. In fact I dug up the printed copy of you Engine Swap guide today and went over it again.
I’ll e-mail fastflip about his swap and ask him some questions.
I’m highly considering the poor man’s ITR so you might have mail in the next little bit.
Again thanks for your help.