^^ Cause we spent most of the time looking for the lug nut key ahem! lol. jk
ohhh yes. it took me 2 mins lol 
[QUOTE=Stevo-DA;2120531]man 3 hours on pulling a tranny SLOW!!! lol jk jk
looks good keep up the good work hope to come to CO when im done here in Korea, and meet you guys! seems like everythings happing in CO lol[/QUOTE]
LOL, well we did run into a small issue here and there, and well no project in the garage is complete without a lot of bullshiting and couple of smoke breaks 
Colorado’s the place to be man, I thought you knew:rockon:
ording my cams tonight!
*Golden_LS I have your tracking number I will email you.
SO! I’ve decided to see if my buddy has a dial-bore gauge and the right micrometer for measuring out the bearings. Basically at this point I am “doing it myself” but not with plastiguage as it is too inaccurate. If Im spinnin that bish to 10K I need perfect everything.
Talked to titan motorsports and they are going to do an exchange for 81.5mm version of my pistons (No restock fee :rockon: ) and then the block is coming out and getting punched this week!!! woot!
Cruise Sat during the day?
probly not for me if i am moving
dude you’re goin cruising lol.
that puts me out, work owns me durring the weekend days:(
Maybe later saturday evening? Say… 6:30 7ish?
my only other prob… im rolling around on expired tags… hehe
just tell them you forgot. Its usually no big deal I’ve gotten nikt with expired plates before and usually they will let you off if you get renewed before court
You have been texted… haha
I can go anytime after 5:30 since thats when i get off of work.
well I think it will be sunday when we are going cruising cuz its better for everyone. Looks like Nick is coming & my buddy josh with a 93 del slow. Hehe
Hell yea man, glad to see you ditched the boost. another fast NA for FTW! That’s still a pretty damn aggressive build though 
So my car won’t stand a chance against yours but should run about 100K miles longer 
[QUOTE=BLKACK1;2120854]LOL, well we did run into a small issue here and there, and well no project in the garage is complete without a lot of bullshiting and couple of smoke breaks
Colorado’s the place to be man, I thought you knew:rockon:[/QUOTE]
I wish I lived in Colorado. I hear it’s one of the most naturally beautiful states. And the snowboarding’s got to be a plus too . Maybe one day I’ll move there. I would like to now but it would be pretty hard to leave since I’ve lived here all my life.
Hahah 100k more my ass! I’m building mine way over what I need.
I won’t drive mine quite as much as you will drive yours, as mine is going to have pretty much straight pipe 2.5in with no cat and no muffler lol…so it will be a police magnet.
!!!UPDATE!!!
PISTONS: Shipped back for 81.5mm pistons.
CAMS : Will arrive ~Saturday.
BLOCK : Hanging by the driver side mount bolt. Will come out this weekend and be in the shop getting drilled, measured for bearings and of course massively cleaned!! :rockon:
----HEAD----
Need to pull off all the excess junk (intake mani and such) and drop it off at Drews shop.
Intake mani:
Goin in for porting next month.
Exhaust mani (kidd racing RMF):
Getting ordered very soon (like the next couple days.) Got a killer deal from homie!
----Needs----
Full-Race traction bar.
All coolant and such hoses.
Gaskets (top end & bottom end)
MFactory LSD
MISC wire connectors for wire tuck.
Parts for trunk battery reloc.
HID’s and a pair of projectors for retrofit.
camber kit (PLEASE! Any suggestions with experience are appreciated)
Sway bar (asr kit hopefully)
Hondata S300
Clutch
Flywheel Resurface
Raxles
Neuspeed front strut bar
ES Master bushing kit
Motor bearings
Fluidyne radiator (Glynn don’t sell yours to n/e but me mang! lol)
PLX-M 300 wideband
Injectors
Fuel pump
Valve train
.
Tax return
.
E85 in the tank
Longs way to go there. I’m going to disappear when you suddenly need help lol. go eat pho at home.
pho real? :werd: