Here is the next segmented of parts that I’m pulling off my car. Here is what I can tell you about them-
- Moates Emulator works
- The old style Hondalog datalogger works
- The p28 used specifically for live tuning that the emulator and datalogger are hooked up to works
- The AEM wideband works, however the O2 is very selective. It just a Bosch sensor. It may or may not need to be replaced. When I pulled it worked, it just took longer than usual for it to heat up which is typical it seemed like. The wideband has maybe 5 hours of tuning on it with unleaded gas.
- The OBD0-OBD1 harness is in perfect shape. The harness has been tapped for the AEM wideband.
I’d like to see the above package go to a good home for CHRISTmas, if not, I’ll try another avenue but I always like to try my fellow members first. 50 cents on the dollar for these parts (not including the chipped ECU) is $259. The ECU (P28) was harder to price since the market is saturated with them so I’ll say its worth $150 so:
$409 + 3% PayPal and $15.00 to ship it USPS
The only other thing you would need to convert your car from OBD0-OBD1 is a OBD1 distributor and a 4 wire O2 sensor. If you wanted to pick both those items up, I have them for sale as well. I’ll throw them in for $100 if you buy the above package.
The 2nd P28 is what I used all the time after the tune was finalized. I’m not sure if the datalogging header works. I used this specifically when I was done tuning. It worked perfect, no issues other than the data logging header. It has been tampered with but never successfully setup. I’ll let this go for $125 + 3% PayPal + $12 freight USPS.
The last thing I have is a OBD0-OBD2A conversion harness. Its tapped also for an Apexi AVC-R. The harness is tapped but you could take the taps out if you didn’t want to run that controller. Expensive ass harness for any AEM or Apexi Power FC at $165- I’ll let it go for $85 + 3% PayPal + $5 USPS Freight
And now the eye candy, enjoy and thanks for viewing!
