I have a set of JDM One peice Headlights that are modifed with Projectors inside. These are a one of a kind headlights. Shine very nice, the plastic cover is in mint condition. I will have photos of them here when I get a new camera to take a photo of them. My price is $500 no less, and I will not go lower than what I am asking. JDM lights are kind of hard to come by nowadays, and I don’t know of any 90-93 JDM lights that have projectors in them other than the ones I have currently. I am not looking to trade the lights for anything other than cash…
I also have the after market one peice lights (NOT JDM) (not the one with the nipple projector). These are the Black ones, they are nice, but I am selling them cause I am selling of of my Integra’s. I paid $250 for them, but will consider trade
The Integra I am selling is a 1990 OBD 0 sedan 5 speed with a B17a, running a modified P28, YS1 GSR transmission with a M power LSD (less than 1000 miles on LSD) with a new Exedy clutch.
I might consider parting the engine if you pull it or you buy the whole car.
I Also have B18C in good condition (no Distrubutor) engine ONLY with P72 ECU and original OBD 2 engine harness. I want no less than $1000 plus shipping. I have the engine setting on a crate ready to be shipped. I can deliever local Tacoma Washington.
I have a Brand New Godspeed T3/4 Oil/Water cooled AR.70 turbo, NEVER intalled plus a small Intercool. Asking $600, or trade offers.
Found one!
About 9 posts down just sold a pair for $260.00
luckyflip FS TX:Gs-r fender moldings,Oem hood bra with fender peices,Jdm One peice headlights.
[QUOTE=Kill Y-Tee;2307814]Found one!
About 9 posts down just sold a pair for $260.00
luckyflip FS TX:Gs-r fender moldings,Oem hood bra with fender peices,Jdm One peice headlights.[/QUOTE]
are you dumb or something? op is selling custom real 1pc headlights with projectors!
I was saying that a set of REAL 1 piece headlights just sold for 260.00 bucks and that IMO “modding” them to put projectors in them decreases their value. I dont understand how taking a rare part and altering it to fit aftermarket lights can increase the value??? Another set of 1 piece headlights that have lost all of their oem value.
Not everybody is super anal about OEM. Some people like, appreciate, and are willing to pay more for custom one off stuff. I doubt they are cheap ass projectors. But maybe.
OP did you make these? Or did you buy them from darussianone? Gotta say, his were like the sickest ones I’ve seen. And would be grabbing these if I didn’t get that other mentioned set lol.
I wasnt being "anal: about oem. Its the awareness that theses parts are becoming more and more rare. With the disappearance of limited parts due to low production numbers or very few years of model production, or country specific application, Honda enthusiasts are realizing the true value of unmolested or un-“modified” hard to come by parts. Any said altering of these parts makes them that more rare. This is what drives the price up and makes these parts harder to find’. I can understand customizing your personal vehicle for what you find to be “one off”, but when you are doing it to these scarce headlights and then selling them the whole process becomes obsolete and it now only adds to the diminishing population of what remains. We all know how rare these are, is it ok with everyone if there are none left at all? I dont think its ok, and Ill say it. If your gonna “RICE” rare parts then keep em to yourself!!
At the end of the day, it all comes down to what you “like”. That’s why people spend money on JDM headlights, that aren’t OEM in the US, and customize their car to what they like. You can’t really say “would it be ok if their weren’t any at all” because eventually modified or not, they will be gone. I do agree that once something OEM is modified it takes away from the value.
But I also don’t think people understand HID’s and projector retrofits are two different things. Someone just throwing in ebay HID’s to me is “RICE”. Taking a halogen headlight and putting in a “OEM” projector retrofit to make it a better quality part is someones preference for better visibility. And there is a market for that. So even though to some people it might be a waste because it isn’t truly OEM, other people might want it.
I’d love to a set of JDM headlights retrofitted with projectors or just OEM. But instead I’m going a different route retrofitting USDM lights. GLWS OP.
dio253
Nope these are not my old lights those are still on my car
An one piece lights are not that hard to find (jdm) you want hard stuff to find let me know ill give you a list lol
Agreed with the past couple comments.
Darussianone, oh ok good. yours are amazing! Lol, would have been a little mad if they were yours and I missed a chance to grab them.
Kill y tee, wasn’t directly calling you anal about oem, it was a broad term. You know how many people ARE super anal. I was just stating that not everybody is, whether you may be or not.
Point is, the “market” for high priced OEM/JDM products is small enough in general, let alone the market for properly retrofitted headlights. Combine the two and you have an even smaller market.
There is no real scale for value… The headlights themselves can go for $300+ in mint condition. Add in the time and labor of a proper retrofit, and cost of actual parts… Yeah, price can be high.
The issue is finding the right buyer. “I will not take less than…” is not the best attitude. The best way to move something is have a little bit of wiggle room for a serious buyer… because I don’t see you getting $500+shipping for these headlights that have yet to have proper pictures posted.
Good luck though, as a proper retrofit looks great.
Shit Doofdoof wants to know the super hard parts to find and Jdms aren’t really that hard to find I found a guy local off cl grabbed for 80$ lol forty a piece hehehehe
Kill~y, Get kick by a impala right dead center of your forehead, and I will come there and kill the animal that hurt you for installing some partial intelligence into you and have dinner with you.:owned:
The lights I have are purchased from a soldier at JBLM (Ft Lewis) who modified them by taking them apart to install Projector lights plus HID’s Do the Math alone, and find that $500 is way below the price it should sell for, but thanks to your ignorance. I chose only to sell these lights to someone who appericate and care for them.
I am also trying to work a deal that I can afford to start, by making a set of DA lights that are Glass not plastic. I forgive your youthfulness for not taking the time to realize the (how is to be) made concept.
Unified, I completely agree with you, when I found these, I admittedly purchased them so I can make more for the G2IC crew. Photos don’t show the righteous. When I get these made in Glass stone, with HID’s that can be easily purchased (not like how the H4H bulbs were hard to find) and find and or make the connectors so the need not be anymore cutting, then we canenjoy these.
endlessturismo, I cant understand most of what you wrote. It must be your “youthfulness” that not only causes your grammar to lack but also makes you dumb enough to think that you will get money invested into a project back out of it when you sell it. Everyone knows that you never recoup money invested to “customize”, especially when altering a perfectly functioning piece of equip light a headlight. Im not sure why it matters how much money or time someone else put into making these lights. They will never sell for what you are asking anyway, especially with all the detailed pics you posted for wanting that ridiculous amount. The only enlightening contribution you managed to barf all over your last comment was the fact that you had no hand in creating the lights, which will be the only positive selling point. Best of luck luck creating your new ones, But I doubt anyone will be holding their breathe for that to actually happen! GLWS!
Haha what did he say? Something about getting kicked in the head by an impala and then taking you to dinner?
I personally am a big fan of retrofits. Anyone who’s actually driven with one knows how big of an improvement in output they have over stock halogen units. That being said though, you haven’t given any information about what projectors, bulbs, and ballasts are included in these lights. You haven’t provided any close up pictures of the headlights themselves or pictures of the output.
Do you really expect someone to pay you $500 + shipping for some “jdm lights with projectors” sight unseen? At least try to give potential buyers basic information like specs on the projectors. Just trying to help you out.
