What’s going on. Car is out at the body shop so this is a good time for me to gather all of my extra parts and get them out of here before the car comes back. All prices are OBO (be reasonable) low ballers subject to lashing out. All items will be picked up in Santa Clarita, CA 91387 unless otherwise discussed. First pay first serve.
Contact - Mike
m.schoelen AT yahoo
call/text 626.392.1194
[SIZE=3]SOLD[/SIZE] JDM 4-1 Header 98+ Spec - $150 (no ship) [SIZE=3]SOLD[/SIZE]
It does have the lower shield, but I can’t find the upper
[SIZE=3]SOLD[/SIZE] EM Racing Full X-Bar set up (c-pillar not pictured is included) - $275 (shipping $25) [SIZE=3]SOLD[/SIZE]
On one of the cross bars the EM Racing sticker wiped away when I was cleaning it.
[SIZE=3]SOLD[/SIZE] MOMO Monte Carlo 320mm Steering Wheel - $125 (shipping extra) [SIZE=3]SOLD[/SIZE]
I used it for about 5 years as a daily wheel but it still looks great
[SIZE=3]SOLD[/SIZE] HASPORT 90-93 Integra Hydraulic Right Hand Mount - $75 (shipping $10) [SIZE=3]SOLD[/SIZE]
I never used it, I decided to stick with the cable trans. I think it has the U70A (race) bushing in it but not sure
[SIZE=3]SOLD[/SIZE] SAMCO Sport Hoses (RS,LS,GS) 2pc. - $70 (shipping extra) [SIZE=3]SOLD[/SIZE]
[SIZE=3]TRASHED[/SIZE] 90-91 OEM Steering Wheel - $10 (no ship) [SIZE=3]TRASHED[/SIZE]
OEM Brake Booster - $75 (shipping $20)
Working just fine. Took it out to have it coated and purchased a new one at the same time. Decided to keep the new one, but they look almost identical.
[SIZE=3]SOLD[/SIZE] AEM Short Ram Intake RS,LS,GS - $65 (shipping $20) [SIZE=3]SOLD[/SIZE]
[SIZE=3]SOLD[/SIZE] 90-91 OEM Front Bumper w/OEM Lip - $30 (no ship) [SIZE=3]SOLD[/SIZE]
It’s not in perfect shape, but originally I was planning on having this bumper for the track. I have finally come to the realization that having 3 bumpers just isn’t needed. If you wanted this bumper to be repainted, and body shop could easily clean up some of the small damage on the bumper
You can see it will clean up pretty easily
Here is the worst of it
[SIZE=3]SOLD[/SIZE] Full B18A1 motor + A1 Trans and everything else pictured - $300 [SIZE=3]SOLD[/SIZE]
The motor was pulled at about 165k, the clutch was replaced with a enter force clutch around 130k. Flywheel was replaced with a Fidanza lightened flywheel. Has the alternator, axles, master cylinder, A/C, PS, OEM Harness, PR4 ecu, OEM motor mounts, and pretty much anything else you could think of that comes out of the engine bay (except the sub frame). The transmission would grind 2nd on occasion if you were really hard on it. You will need a cherry picker to removed the motor from the garage.
PasswordJDM Carbon Kevlar Power Chamber Intake. - $125 (shipping $20)
Used for about 2k miles. It was only an intermittent setup until I pieced together my OEM intake. This was built for the EK (i think) but fits the DA just fine.
Let me know if you have any questions.