Been ages since I posted, hoping to get some educated opinions from you guys on the results of my dyno run and build project.
The plan was initially to turbo my db2, ended up with an ls/vtec/turbo setup, with other bits that got added along the way. Appreciate thoughts on the results - tuner said he was very pleased.
Big thanks to G2IC/Neil for running the show, for the turbo guide, and all members for making this site what it is.
looks good…i see a little dip in the power curve at around 6k rpm other than that pretty smooth all the way across…
but a little more input on your set up would be nice…
12.36 is a little lean for a turbo car, but other than that, you seem to be making decent power for ~11 psi.
Looks good but i agree that 12.3 is pretty lean for a boosted car. I would sacrafice power for safety and go for at least an 11.5 or so. Also what kind of load was the car pulled at?
I agree with the other 2 sayings you A/F but 300whp is not bad at all for 11psi, I made 278whp at 9psi on my past set up.
