i am having some issues with the turboedit program and the datalogging stuff… i have done everything that xenocron’s techs told me but it still isn’t working… i need someone to look at my shit and tell me what im doing wrong…
ok, are their any in texas or oklahoma?
alright, so yeah, since no one seems to know if their even is someone that will help tune my car in texas i will go as far as asking if anyone in any of the surrounding states can do this? i will take any were near texas…
as far as dataloggin goes im having the same issues with turbo edit as well…its not logging at all and when it does the numbers dont make sense. what i do is ride with my buddy and he writes down when the car bogs at what vaccumn and rpm and also writes down the afr. so far we have been doing this and nothing has gone wrong and i see improvements all around everytime we go out. hopefully that helps
thanks man… i still would love to have someone experinced to help me with my tune… im in abilene at dyess air force base and i am willing to drive as far as oklihoma… but dallas or san antonio would be better… can anyone help?
Hopefully I caught you…I am getting my DA tuned by Tony Palo of T1 Race Development out in Rowlett, somewhere near Garland come Tuesday, August 19th. My tune appointment is at 9:30 a.m if you care to arrange a meet up in Fort Worth on that date. I currentlly live in Fort Worth and have a 44 mile commute to get there. Tony Palo tunes HonData S100, 200, 300 and K pro. As far as other standalones, I could not tell you.
You might want to look into Chris Macellaro of macellarosperformancetuning.com. He is based in Arlington, but you would have to schedule an appointment with him. Check his website and his work as well as Tony Palo’s website (t1racedevelopment.com).
I am currentlly running a T3/T4 set up on a built LS and S100. I had a problem finding someone who has S100 software. Get with me if you have the time next week.
Hope this message got to you!
hey im also trying to find someone to tune i have an sst chipped ecu. i dont knoww what its tuned to but if anyone esle has info and anyone who has the stuff to tunes ecus that are chipped let me know
Have you tried Redline Per4mance in Arlington? I think Phong does chipped ecus. If not, go to those websites I mentioned on the last message I sent and find there contact on their page.
By the by, what are you working with on your Teg?
I have a 90 4 dr integra with a stock motor that just went out the door. I set boost at 14psi and it ran good. Car also gots upgrade fuel pump and injectors. But for some reason (maybe having to do with ecu) i could not rev past 4k i never got any cel. the only time it would let me rev past that was when i left it in 3rd gear at 3800rpm and let go of the gas the cel would come one and then it woould rev right through.
But ill call up those people and see if anyone can tune this ecu cause im in process of looking for a motor cause thats my dd. So if anyone has a b18a1 for sale in the dfw let me know
What do you mean by cel? Hey also look at the G2 meet for forum for DFW and see if you make any of those dates. Maybe we can help you at the meet!
when i say cel (check engine light ) comes on but i get no codes from ecu im trying to get car up and running to make it out there
alright, real quick, what obd are you running? I had a cel issue on my car, and had to have it taken care before tuning. Friend of mine told me to take out the hondata ecu (now OBD1), and install my old OBD 0 to find out the code issue. It worked out well cause I was able to source the problem through a severed wire on engine coolant temp sensor. With the OBD 0, I had the blinking lights on the ecu and used a Haynes manual. If you got another ecu that is not chipped, try that. I hope that helped you. let me know something…
i belive im running OBD 0 cause the light on the ecu is were i pull cel codes. Im swaping a motor in this weekend hoping to make it out there on Saturday.
And sorry 2ndgenteg1 for high jacking thread
hey, its all good… i still need help though guys any would be awesome…
90turbo, pm me and I’ll give you my #, would like to come help you out if possible. I live just off 360.
[SIZE=“3”]Say, 90turbointegra, are you able to join us for the G2 meet in Arlington on Saturday November 1st? I mean, you do live next door, thats if you live in Grand Prairie. (91_ClusterFawk, you are a cluster F*^k for not inviting him)LOL. No seriously, come out and bring some G2 owners out with you that you might know. [/SIZE]
sorry been busy. i got a hold of another motor droped it in and then one one the head bolts thread stripped now im in the process of trying and fixing it. ill try and make it out to the meet. If anyone know how to re thread the holes or know how to build a motor let me know im willing to pay.