Heck yea! And thanks! It was kinda sad to see how they looked after sitting on my other car for a couple years. Definitely nice to breath some new life into’em
For reference here’s how they looked when I first bought them a couple years back ($99shipped off of ebay! WOOT)
Looks good! I want to sell the civic and get another teg now lol
Good job man! Car looks swell! It’s about time you refinished those headlights lol.
Dayum!!! Those look good 
LOVE TO SEE DB2 SAVED!! SAVE THE DB2’s!!!
Mini want your headlights!!!
Ahhhh, the one that got away! Looks good. I have to admit I’m jealous. That car is so photogenic.
Any updates
lol… spamming the build threads looking for updates?
No just checkin on some of the builds I’m following is there a problem with that?
No updates on the DB2, just been putting in all of my work into my new daily. It sucks. Since I put the Koni’s on, I’ve installed my Full-Race bar, Ingalls rear camber kit, 15" Dodge Omni wheels, and the resurfaced 11" fronts with “ITR” calipers. The clutch is real close to being done, so I just bought a Comp Clutch Stage 4 and CC 12lb flywheel the other day. Also since it grinds third, and I have this GSR YS1 laying around, the plan is carbon synchros, MFactory LSD, and maybe powder coat the case. GRNACK and I are going to an open track day at High Plains Raceway on the 9th, so I’m shooting to be all set by then
I love daily’s that are taken to the track every now and again! Speaking of which, we need pics of you guys tearing it up!
Haha, yesterday was awesome! I took my little brother’s sweet ass Nikon D3100, and of course the battery was pretty much dead, and his SD card wasn’t working properly 
So I only got one picture.
As far as my car holding up it did pretty alright till the end. I just barely finished up my clutch at 2:00am on Friday morning so a bit of track time was spent getting used to driving on the new clutch. I definitely had a blast and really just need some more seat time, as my lines weren’t all that great towards the beginning, LOL. I forgot to put the Gopro in my car too, so all we got were of Glynn behind me for a couple laps, lol. Can’t wait to go again!
Here’s the only picture I managed to snap:
Glad you had fun and the car made it back in one piece! Your ride looks really swell
awesome another isle green pearl DA! its nice seeing very few of these it makes me feel special knowing that i own one too. hahaha other than that, clean ride you got there!
Track day!!! Sorry couldn’t make it. Hope you guys had a good time 
Haha, yea making it back in one piece was my main objective! And thanks a lot man, I appreciate it. I’m pretty satisfied with how it’s looking/driving now, just need to focus my attention to the interior now. Haven’t even vacuumed or cleaned it up, pretty filthy 
It is an awesome color, I definitely dig it. thank ya
I was bummed you didn’t come out :(. I had a blast though! Can’t wait to do it again, and been thinking hard about getting into some HPDE. There’s some things I need to sort out with the car first, but it really sounds like a good time to me
And since none of the other peoples have posted updates I’ll be the first to post a picture of mine :). Some of us went in on a groupbuy and got a pretty good deal on these. Major BIGUPS to DallasMotors for coming through on these, you came through big time. Thanks buddy!
It’s an MFactory helical for my short geared YS1 I have:
… Bastard! 
Edit
Again, good looking out on the part number for HondaPartsNow/Balljoints. I just received my set from UPS this morning… w00t! Not trying to threadjack, just figured you’d notice a ‘thank you’ here before seeing it in my thread.
[QUOTE=mrpenny;2229239]Haha, yea making it back in one piece was my main objective! And thanks a lot man, I appreciate it. I’m pretty satisfied with how it’s looking/driving now, just need to focus my attention to the interior now. Haven’t even vacuumed or cleaned it up, pretty filthy
It is an awesome color, I definitely dig it. thank ya
I was bummed you didn’t come out :(. I had a blast though! Can’t wait to do it again, and been thinking hard about getting into some HPDE. There’s some things I need to sort out with the car first, but it really sounds like a good time to me
And since none of the other peoples have posted updates I’ll be the first to post a picture of mine :). Some of us went in on a groupbuy and got a pretty good deal on these. Major BIGUPS to DallasMotors for coming through on these, you came through big time. Thanks buddy!
It’s an MFactory helical for my short geared YS1 I have:
[/QUOTE]
Hey no problem I just cant wait to see them in action
[QUOTE=unified112;2229268]… Bastard! 
Edit
Again, good looking out on the part number for HondaPartsNow/Balljoints. I just received my set from UPS this morning… w00t! Not trying to threadjack, just figured you’d notice a ‘thank you’ here before seeing it in my thread.[/QUOTE]
Hehe, it’s been on my to-buy list for a while. The plan was just get the LSD, get parts for the transmission, do a rebuild and install a new clutch/flywheel all before the last trackday. But that definitely didn’t work out. I was going to try and milk my clutch through the trackday, but it decided it was done, so I had to just install the clutch, flywheel, raxles, and a transmission BLKACK lent me to get going. So as soon as I sell my red DA I’ll be able to get parts from synchrotech and hopefully a set of Hasports. We’ll see about the mounts though, this car has already going in a direction I didn’t intend on taking, but I just can’t help drive a car around that’s falling apart! Suspension bushings, ball joints, wheel bearings are in the plan as well, ugh…
And no sweat on the link brotha, glad it could help you out!
Heck yes, neither can! Soon enough! Did Fares get his transmission back from his install?
Oh yea, finally got some videos uploaded from the past trackday. Forgot to put BLKACKs Go-Pro in my car, so these were taken off of his EVO